Actuation identification | Solenoid A, Solenoid B |
Actuation type | Solenoid Operated |
Actuator identification | Flag with Standard Build as Per ANSI B93 9 |
Application | Die casting & foundry, Machine tool, Marine/Offshore, Press, Primary metal, paper, Test equipment & simulation, Turbine control (wind, steam, water) |
Body Material, Body material7 | Gray Iron |
Build orientation | Solenoid `B` at port `A` end of valve and Solenoid `A` at port `B` end of valve |
Build type | Spring centered |
Coil rating | 110 Volt AC 50 Hz/120 Volt AC 60 Hz |
Coil type | 1/2 inch NPT thread conduit box |
Design code, Design code11 | 60 |
Diode, Manual override, Special features, Special features17, Spool monitor switch | None |
Eccn | EAR99 |
Electrical connector | Flying Lead Coil with 1/2 In. NPT Thread Wiring Housing |
Flow Rate, Flow rate12 | 80 litre per minute |
Fluid cleanliness | 19/17/14 micron |
Fluid compatibility, Fluid compatibility13 | Petroleum oils |
Function | Directional Control Valve |
Icc2 | IV Directional Control Valves |
Interface | ISO4401-03 |
Leakage | Standard |
Light, Reducer module | No |
Model Code | DG4V-3-2C-M-FTWL-B6-60 |
Performance | High Performance |
Pressure rating | 350 bar |
Product height | 3.57 |
Product height uom, Product length uom, Product width uom | inch |
Product length | 7.87 |
Product trade name | DG4V-3 60 Design |
Product weight | 4.40 |
Product weight uom | pound |
Product width | 1.80 |
Seal Material, Seal material16 | Buna-N |
Size | D03 |
Spool center condition | A Port and Double Offset sensing switch on B Port |
Spring arrangement | C |
Stage | Single Stage |
Sub brand | Vickers |
Tank port rating | 210 bar |
Valve mount type | Subplate/manifold mounted |
Wattage | 20 watt |
Working temperature max | 70 degree Celsius |
Working temperature min | -20 degree Celsius |