| Agency Compliance | c UL us |
| Amps | 13.5/7.6-6.7 |
| Application | Moderate Flow at Moderate Head Pressure |
| Bearing Type | Ball |
| Best Efficiency GPM @ Head | 55 gpm @ 55 ft., 55 gpm @ 55 ft |
| Best Efficiency Range GPM @ Head | 41 to 73 gpm @ 70 to 30 ft |
| Brand | Dayton |
| Cord Length | Not Applicable |
| Current Stock | 8 |
| Discharge Pipe Size, Intake Pipe Size | 1 1/2 in |
| Drain Plug | Easily Accessible |
| Duty | Continuous |
| GPM of Water @ 10 Ft. of Head | 85 |
| GPM of Water @ 15 Ft. of Head | 81 |
| GPM of Water @ 20 Ft. of Head | 78 |
| GPM of Water @ 25 Ft. of Head | 75 |
| GPM of Water @ 30 Ft. of Head | 73 |
| GPM of Water @ 40 Ft. of Head | 66 |
| GPM of Water @ 50 Ft. of Head | 59 |
| GPM of Water @ 60 Ft. of Head | 50 |
| GPM of Water @ 70 Ft. of Head | 41 |
| GPM of Water @ 80 Ft. of Head | In Stock |
| Height | 7 1/2 in, 7-1/2" |
| Housing Material, Impeller Material, Volute Material | Noryl |
| HP | 1-1/2, 1 1/2 hp |
| Hz | 60 |
| Impeller Type | Closed |
| Includes | Manual |
| Inlet Pressure | 75 PSI |
| Inlet, Outlet | 1-1/2" NPT |
| Inlet, Outlet | 1-1/2 in NPT |
| International Shipping | No |
| Item | Centrifugal Pump, Chemical Resistant Centrifugal Pump |
| Length | 15-7/8" |
| Length, Length (Straight Wireway) | 15 7/8 in |
| Manufacturers Warranty Length | 1 yr., 1 yr |
| Max. Case Pressure | 100 PSI |
| Max. Dia. Solids | 1/4 in, 1/4" |
| Max. Fluid Viscosity | 100 SSU |
| Max. GPM @ Head | 85 gpm @ 10 ft., 85 gpm @ 10 ft |
| Max. Head | 82 ft., 84 ft |
| Max. Liquid Temp. | 180 Degrees F |
| Max. Specific Gravity | 1.0 |
| Min. GPM @ Head | 21 gpm @ 80 ft. |
| Motor Enclosure, Motor Type | TEFC |
| Motor RPM | 3450 |
| Mpn | 2YEW2 |
| NEMA/IEC Frame | 56J |
| Overall Height | 7.5 in |
| Overall Length | 15.9 in |
| Overall Width | 7.6 in |
| Phase | 1 |
| Port Rotation | 4 Position |
| Prop 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Screw Material, Shaft Material | Stainless Steel |
| Seal Material | Viton, Noryl(TM), Carbon, Ceramic |
| Seal Type | Mechanical |
| Service Factor | 1.3 |
| Shaft Outer Diameter | 5/8 in |
| SKU | ZO-G2884463 |
| Solid Diameter (Maximum) | 0.25 in |
| SubCategory | Pumps |
| UPC | 190735238684 |
| Voltage | 115/208-230 |
| Wetted Materials | Noryl, SS, Viton, Carbon, Ceramic |
| Width | 7 5/8 in, 7-5/8" |