| Body Dia. | 3.3" |
| Capacitor Required, Usable @ 200V, Usable @ 208V | No |
| Cord Length | 12 in |
| Duty Cycle | Continuous |
| Frame | 3.3 |
| Full Load Amps | 0.70 |
| HP | 1/70 |
| Hz | 60 |
| Ins. Class | B |
| Item | HVAC Motor |
| Length Less Shaft | 2 13/16 in |
| Max. Ambient Temp. | 40 Degrees C |
| Motor Application | HVAC/R |
| Motor Bearings | Sleeve |
| Motor Design | Shaded Pole |
| Motor Enclosure Design | Totally Enclosed Air-Over |
| Motor Mounting Position | All Angle |
| Motor Mounting Type | Stud |
| Motor Service Factor | 1.00 |
| Motor Shaft Design | Flat |
| Motor Shaft Rotation | CWSE |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Thermal Protection | Auto |
| Mounting Stud Location | 2/Both Ends |
| Mounting Stud Pattern | 2 7/8" |
| Nameplate RPM | 1,550 |
| No. of Speeds, Number of Shafts, Phase | 1 |
| Shaft Dia. | 1/4 in |
| Shaft Length | 2 in |
| Standards | UL Recognized: CSA Certified |
| Voltage | 115 |