Attributes
| Key ^ | Value |
|---|---|
| Case Coating | None |
| Contact Type | Contact Seal |
| Country of Origin (subject to change) | Multiple |
| Design Code, Seal Design | SA |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 m/s and 55 HRC @ 10 m/s |
| Inside Dia., Inside Diameter | 172 mm |
| Item | Rotary Shaft Seal |
| Lip Material | Nitrile Rubber |
| Lip Material Application | Nitrile Rubber for General Applications |
| Max. Pressure, Maximum Pressure | 7 psi |
| Maximum Surface Speed | 999 mps |
| Maximum Temperature | 250 Degrees F |
| Minimum Temperature | -40 Degrees F |
| Number of Lips | 1 |
| Outside Dia., Outside Diameter | 200 mm |
| Overall Width, Width | 15 mm |
| Seal Type | Single Lip with Spring |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
| Standards | DIN 3760 |
| System of Measurement | Metric |