Angle | 90? |
Application | Designed for use with liquids, consult Anderson Process for specific recommendations. |
Brand | Dixon Valve & Coupling |
Construction | Produced as a welded fabrication |
Description: | 1-1/2" 90? Male Adapter x Fem Cplr 316SS Welded Fabrication |
Domestic/Import | Domestic |
End Style | Male Adapter x Female Coupler |
Fitting/Connector Type | 90 deg Elbow |
How it works | To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged. Extremely easy to open, the releaser lever is under your thumb when you want to open the fitting, ergonomic. |
Manufacturer, Supplier: | Dixon Valve & Coupling Co |
Material | 316 Stainless Steel |
Max operating pressure (psi) | 250 |
Maximum Operating Pressure, Pressure Rating, PSI | 250 PSI |
MFG Part #:, MPN | 150DA-90SS |
Nominal Size | 1-1/2 in |
Product | Elbows & Bends |
Product Type | Simple product |
Safety Notes | Under no circumstances should cam and groove couplings be used for compressed air or steam service!; Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70?F (21?C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Anderson Process. |
Seal | Nitrile rubber, Buna-N |
Size | 1 1/2 in, 1-1/2" |
Specifications | Produced to interchange with all product produced to Commercial Item Description A-A-59326D. |
WARNING! | This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov |
Weight | 3.930000 |
Weight Lb | 3.9300 |