Base to output center height | 1.9900 in, 50.546 mm |
Case size | 17 |
Center distance (in) | 1.7 in, Center distance (in):1.7500 in, 44.45 mm |
Center to end of shaft distance | 4.3100 in, 109.474 mm |
Finish, Paint type | White epoxy |
Horsepower rating input | 0.6000 hp, 0.447 kW |
Horsepower rating output | 0.4300 hp, 0.321 kW |
Housing material | Cast iron |
Input | 56C flange |
Input flange | 56C |
Input HP | 0.6 |
Input style | Quill |
Lubrication type | PAG, standard temperature |
Motor compatibility | NEMA motor, 56C frame |
Mounting bolt pattern length | 4.1900 in, 106.426 mm |
Mounting bolt pattern width | 2.7500 in, 69.85 mm |
Nominal ratio | 40 |
Output | Right side solid output shaft |
Output bore/shaft diameter | 0.875 in |
Output horse power | 0.43 |
Output shaft center to input motor mounting face distance | 4.9000 in, 124.46 mm |
Output style | Right |
Overhung load | 1190 lbf, 5293.384 N |
Paint/coating | White |
Rated torque output | 627 in/lb, 627.0 in/lb |
Ratio | 40 to 1 |
Seal type | Single-lip contact |
Shaft diameter output | 0.8750 in, 22.225 mm |
Shaft length output | 1.7400 in, 44.196 mm |
Suitable for washdown | No |
Thermal horsepower rating | 1.0900 hp, 0.813 kW |