Base to output center height | 3.9900 in, 101.346 mm |
Case size | 35 |
Center distance (in) | 3.5 in, Center distance (in):3.5000 in, 88.9 mm |
Center to end of shaft distance | 7.0600 in, 179.324 mm |
Finish, Paint type | White epoxy |
Gearbox component type | Gearbox |
Horsepower rating input | 15.1800 hp, 11.32 kW |
Horsepower rating output | 14.4000 hp, 10.738 kW |
Housing material | Cast iron |
Input | 210TC flange |
Input flange | 210TC |
Input HP | 15.18 |
Input style | Quill |
Lubrication type | PAG, standard temperature |
Motor compatibility | NEMA motor, 210TC frame |
Mounting bolt pattern length | 7.5000 in, 190.5 mm |
Mounting bolt pattern width | 4.0000 in, 101.6 mm |
Nominal ratio | 5 |
Output | Right side solid output shaft |
Output bore/shaft diameter | 1.5 in |
Output horse power | 14.4 |
Output shaft center to input motor mounting face distance | 7.5500 in, 191.77 mm |
Output style | Right |
Overhung load | 2120 lbf, 9430.23 N |
Paint/coating | White |
Rated torque output | 2593 in/lb, 2593.0 in/lb |
Ratio | 5 to 1 |
Seal type | Single-lip contact |
Shaft diameter output | 1.5000 in, 38.1 mm |
Shaft length output | 3.5100 in, 89.154 mm |
Suitable for washdown | No |
Thermal horsepower rating | 15.5100 hp, 11.566 kW |