mpn:
brand:
manufacturer:
MPN:
Description:
100:1 Ratio, 0.625" Input Diameter, 0.75" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key | Value |
|---|---|
| Assembly | H-H1 |
| Bore Code | 12 |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 0.1HP to ( |
| Input Diameter (in) | 0.625 |
| Input HP | 0.141, 0.111 |
| Input HP @ 1750 RPM | 0.141 |
| Input RPM | 1750, 1170 |
| Input Style | Solid Input Shaft, Solid Shaft |
| Max OHL (Output Shaft) | 1200 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | H818 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 0.75 |
| Output Hollow Shaft Diameter (in) | 0.750 |
| Output HP | 0.077 |
| Output Key | 3/16 X 1.50 |
| Output RPM | 17 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 277 |
| Output Torque (lb-in) | 304 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Blue |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 100 to 1 |
| Ratio Range | 100-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GR Series - Ironman Worm Gear Reducers |
| Series Code | GR |
| Series Style | GR-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |