mpn:
brand:
manufacturer:
MPN:
Description:
7.5:1 Ratio, 0.625" Input Diameter, 1" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reducer
Attributes
| Key | Value |
|---|---|
| Assembly | BM-L |
| Center Distance | 2.1 In. |
| Center distance (in) | 2.06 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Height (in) | 10.50 |
| Housing material | Cast iron |
| HP Range | 2HP ( |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input Flange | 56C |
| Input HP | 2.793 |
| Input HP @ 1750 RPM | 2.793 |
| Input RPM | 1750 |
| Input Style | Flexible Coupling Input, 3-Piece Coupled |
| Keyway | 3/16 X 3/32 |
| Length (in) | 10.69 |
| Max OHL (Output Shaft) | 1035 |
| Max Thrust Load (Output Shaft) | 811 |
| Model Code | BM821 |
| Motor Frame Size | 56 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left |
| Output Diameter (in) | 1.000 |
| Output HP | 2.562 |
| Output Key | 1/4 X 1.44 |
| Output RPM | 233 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Shaft Orientation | L |
| Output Style | L |
| Output Torque | 692 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 1035 |
| Paint/Coating | Blue |
| Product Line | GRG Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 7.5 to 1 |
| Ratio Range | 7.5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GRG Series - Ironman Worm Gear Reducers |
| Series Code | GRG |
| Series Style | GRG-BM-L |
| Series Type | Cast Iron 800 Worm Gear Reducers |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 56C |
| Width (in) | 9.06 |