| AMP | 8.4 |
| Approvals | CE,EAC,CSACOMP,UR |
| Axial load max | 350 kg |
| Breakdown torque | 200 % |
| Built-in motor protection | CONTACT |
| Built-in temp transmitter, NSF Certified, UL Listed | No |
| Capacitor size - start | 95 ?F/220 V |
| Collection | MS6000QFT40 Series |
| Cos phi - power factor, HP | 0.75 |
| Discharge Pressure | 900 |
| Enclosure class (IEC 34-5) | IP68 |
| Horsepower | 3/4 hp |
| Inside Diameter, Motor diameter | 4 in |
| Insulation class (IEC 85), Model | B |
| KVA code | L |
| Locked-rotor torque | 170 % |
| Mains frequency | 60 Hz |
| Material, Motor | Stainless steel |
| Maximum ambient pressure (bar) | 15 |
| Maximum current consumption, Rated current | 8.4 A |
| Maximum Pressure | 218 psi |
| Moment of inertia | 0.0006 kg m? |
| Motor type | MS402 |
| Motor type 1-phase | CSIR |
| Motor version | T40 |
| Phase | Single Phase |
| Product name | MS 402 |
| Product no | 96465608 |
| Pump Motor Type | 3 Wire |
| R a | 3.35 ohm |
| R s1 | 15.0 ohm |
| Rated full-load torque | 2.33 Nm |
| Rated power - P2 | 0.55 kW |
| Rated speed | 3450 rpm |
| Rated voltage | 1 x 230 V |
| RPM | 2870 |
| Service factor | 1.50 |
| Shaft seal for motor | LIPSEAL |
| Start method | direct-on-line |
| Starting current | 410 % |
| Staybolt | 5/16-24 UNF |
| Thermal protec | internal |
| Voltage tolerance | +10/-10 % |
| Volts | 230V |
| Watts | 550 |
| Weight | 18.739 |
| Windings | Enamelled |