Alternate Mfr Part Number, Manufacturer Model #, Manufacturer Part Number | 5KHC39QN9575T |
Amps | 3.0/1.6-1.5 |
applications: | Agricultural |
Approvals | CSA, UR |
Bearing Type, Bearings, Motor Bearings | Ball |
Capacitor Required, Usable @ 208V | Yes |
Composition, frame material: | Rolled Steel |
Current Rating | 3 A |
duty / condition type: | Continuous Duty, Farm Duty |
Duty Cycle | Continuous |
Efficiency | 68, 0.68 |
Efficiency %, Nominal Efficiency | 68 % |
Enclosure | Totally Enclosed Non-Ventilated, TENV |
Enclosure Material, Motor Frame Material | Steel |
Enclosure Type | TENV (Totally Enclosed Non Ventilated), Totally Enclosed Non Ventilated |
enclosure type: | TEAO (Totally Enclosed Air Over) |
Family Series | Marathon Electric Motors |
Finish | Black Enamel |
Frame, frame size:, NEMA Frame | 48 |
Frequency, frequency rating: | 60 Hz |
Full Load Amps | 3.0/1.60-1.50 |
full load current: | 3.00 / 1.60 |
full load efficiency: | 68.00 % |
Gross Weight | 0 lbs |
Horsepower | 1/4 hp |
Horsepower Rating | 0.25 HP |
HP | 1/4 |
Hz | 60 |
Includes | Gasketed Wiring Compartment Cover |
Ins. Class, Insulation Class, insulation class: | B |
Insulation Type | Class B |
ip rating: | 43 |
Item Number | H649 |
Item, Item - Farm Duty Motors | General Purpose Farm Duty Motor |
Kilowatts | 0.19 kW |
Length Less Shaft | 8 7/8 in |
Manufacturer | Marathon Electric |
Max. Ambient Temp. | 40 Degrees C |
Maximum Ambient Temperature | 40? C |
Motor Application | Farm Duty |
motor category: | General Purpose Motor |
Motor Design | Split-Phase Start/Capacitor-Run |
Motor Diameter | 5-5/8" |
Motor Enclosure Design | Totally Enclosed Nonventilated |
motor horsepower: | 1/4 hp, 0.25 hp |
Motor Mounting Position | All Angle |
Motor Mounting Type | Cradle Base |
motor phase: | 1 ph |
Motor Service Factor, No. of Speeds, Number of Speeds, Phase, Service Factor | 1 |
Motor Shaft Design | Flat |
Motor Shaft Rotation | CW/CCW |
Motor Shell Length | 6.62" |
Motor Sub Application | Belt Drive Fan/Blower |
motor supply voltage: | 115/208-230 V |
Motor Thermal Protection | Auto |
Mounting | Base |
Mounting Orientation | Any |
Mounting Stud Pattern | 3 5/8 in x 3 5/8 in |
Mounting Type, mounting type: | Resilient Base |
Nameplate RPM | 1,725 |
Net Weight | 16 lbs |
Number of Poles | 4 |
Overall Length | 10 3/8 in, 10.4", 10.4 " |
overall length (c-dimension): | 10.40 in |
Phase | Single, 1 Phase |
Product Type | Split Phase Start/Capacitor Run |
Rotation | Reversible |
RPM | 1725 RPM, 1700 - 1800, 1,725 RPM, 1725 |
service factor: | 1.00 |
Shaft Dia. | 1/2 in |
Shaft Diameter | 0.5 ", 1/2" |
shaft diameter: | 0.50 in |
Shaft Length | 1.5", 1 1/2 in |
Ship Weight | 16 lbs. |
Special Features | Service Factor - 1 |
Standards | CSA, UL Recognized |
standards met: | UL, CSA |
Stud Size | #8-32 |
Supply Voltage | 115/208-230 VAC |
synchronous rpm: | 1800 rpm |
Thermal Protection, thermal protection: | Automatic |
Type | Split Start Capacitor Run |
UPC Code | 722856028280 |
Usable @ 200V | No |
Voltage | 115/208-230V AC, 115/208-230 |
Voltage (AC) | 115 VAC, 208-230 VAC |
Volts | 115, 208, 230 |
Weight | 16 lb |
weight: | 15.5 lbs |