3-Phase configuration | yes, 3 units |
AC connection | hardwired + plug connection EU (Schuko) or with NZ/AU plug (code 28412500) |
Alarms | potential free alarm contact |
Approvals | CE, E-mark, RCM |
Continuous power at 25 ?C / 77 ?F, cos phi 1, Continuous power at 40 ?C / 104 ?F, cos phi 1 | 2500 W |
Cooling | temperature and load controlled fan |
Cos phi | all power factors allowed |
Display/read-out | LED indication: battery voltage, status |
Efficiency | 88 % |
Harmonic distortion typical | < 5 % |
High battery voltage, switches off at | 16.5 V |
High battery voltage, switches on at | 14.5 V |
Input current (nominal load) | 250 A |
Low battery voltage, switches off at | 10.5 V |
Low battery voltage, switches on at | 12.5 V |
MasterBus compatible | no |
Minimal cable size | 95 mm? |
Minimal DC fuse (slow blow) | 300 A |
No-load power consumption (energy saving mode) | < 1.1 A |
No-load power consumption (ON mode) | < 3.6 A |
Nominal battery voltage | 12 V |
Output voltage | 230/240 V ? 50/60 Hz (selectable) |
Output waveform | true sine |
Parallel configuration | yes, up to 15 units |
Peak load (3 sec.) | < 3000 W |
Peak load (< 0.2 sec.) | < 4000 W |
Protection degree | IP21, horizontal wall mounting |
Protections | over-temperature, overload, short circuit, high/low voltage, reverse polarity (fuse) |
Recommended battery capacity | ? 270 Ah |
Technology | high frequency, input & output fully isolated |
Transfer system | integrated, automatic (inverter to grid: 8~10 ms, grid to inverter: 16~50 ms). Not for parallel & 3-phase operation (external transfer system possible) |