| [Ith] Conventional Free Air Thermal Current | 20 A 50 ?C power circuit || 10 A 50 ?C signalling circuit |
| [Ui] Rated Insulation Voltage | power circuit 600 V UL 508 || power circuit 690 V IEC 60947-4-1 || signalling circuit 690 V IEC 60947-4-1 || signalling circuit 690 V IEC 60947-5-1 || signalling circuit 600 V UL 508 || power circuit 600 V CSA C22.2 No 14 || signalling circuit 600 V CSA C22.2 No 14 |
| [Uimp] Rated Impulse Withstand Voltage | 8 kV |
| Ambient Air Temperature For Operation | -25-50 ?C |
| Ambient Air Temperature For Storage | -50-80 ?C |
| Auxiliary Contact Composition | 1 NO |
| Auxiliary Contacts Type | instantaneous 1 NO |
| Average Impedance | 3 mOhm - Ith 20 A 50 Hz power circuit |
| California Proposition 65 : WARNING: This product can expose you to chemicals including | Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
| China Rohs Regulation | Pro-active China RoHS declaration (out of China RoHS legal scope) |
| Circularity Profile | ENVEOLI1503003EN |
| Coil Technology | built-in bidirectional peak limiting diode suppressor |
| Contactor Application | motor control || resistive load |
| Control Circuit Voltage Limits | operational 0.7...1.30 Uc 50 ?C) || drop-out 0.1...0.7 Uc 50 ?C) |
| Depth | 57 mm |
| Device Short Name | LP4K |
| Environmental Disclosure | ENVPEP1503003EN |
| Eu Rohs Directive | Compliant |
| Flame Retardance | V1 conforming to UL 94 || requirement 2 conforming to NF F 16-101 || requirement 2 conforming to NF F 16-102 |
| Height | 58 mm |
| Hold-In Power Consumption In W | 1.8-1.8 W 20 ?C |
| Inrush Power In W | 1.8-1.8 W 20 ?C) |
| Insulation Resistance | > 10 MOhm signalling circuit |
| Irms Rated Making Capacity | 110 A AC power circuit NF C 63-110 || 110 A AC power circuit IEC 60947 || 110 A AC signalling circuit IEC 60947 |
| Maximum Operating Rate | 3600 cyc/h |
| Mechanical Durability | 30 Mcycles |
| Mercury Free, Reach Free Of Svhc, Rohs Exemption Information, Toxic Heavy Metal Free | Yes |
| Minimum Switching Current | 5 mA signalling circuit |
| Minimum Switching Voltage | 17 V signalling circuit |
| Mounting Support | rail || plate |
| Net Weight | 0.235 kg |
| Operating Altitude | 6561.68 ft (2000 m) without derating |
| Operating Time | 10...20 ms coil de-energisation and NO opening || 30...40 ms coil energisation and NO closing |
| Overvoltage Category | III |
| Pole Contact Composition | 3 NO |
| Poles Description | 3P |
| Product Certifications | UL || CSA || UKCA |
| Product Or Component Type | contactor |
| Range | TeSys |
| Range Of Product | TeSys K |
| Rated Breaking Capacity | 110 A 415 V IEC 60947 || 110 A 440 V IEC 60947 || 80 A 500 V IEC 60947 || 110 A 220...230 V IEC 60947 || 110 A 380...400 V IEC 60947 || 70 A 660...690 V IEC 60947 |
| Reach Regulation | Free of Substances of Very High Concern above the threshold |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Sustainable Offer Status | Green Premium product |
| Utilisation Category | AC-4 || AC-3 || AC-1 |
| Warranty | 18 months |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| Width | 45 mm |
