| Application | Cable-to-cable |
| Connection Direction | Straight |
| Connector Shape | Round Model |
| Contact | Copper Alloy |
| Contact Resistance | Conductor resistance is 5 m? or less when a pair of contacts are connected at up to the regulation length. |
| Corrosion Resistance | No functional defect was found during the JIS C 5028 salt water spray test. Contact resistance is 5 m? or less. |
| Humidity Resistance | No functional defect was found during the JIS C 5023 humidity test. Insulation resistance is 100 M?. |
| Impact Resistance | No functional defect was found during the JIS C 5026 shock test. Contact resistance is 5 m? or less. |
| Insulation Resistance | 1,000 M? or higher when measured between immediately adjacent conductors with regulated voltage. |
| Insulator | Synthetic Resin |
| Operating Temperature Range | -25?C ~ +85?C |
| Packing | Synthetic Rubber |
| Peak Voltage | No abnormality such as short circuiting occurs when regulated voltage is applied for 1 minute between immediately adjacent conductors. |
| Rated Current | Check with the table below. |
| Rated Voltage | Check with the table below. |
| Repeated Operation | No functional defect was found when a removal and insertion sequence was tested 500 times. Contact resistance is 5 m? or less. |
| Shell | Synthetic Resin |
| Temperature Cycle | No functional defect was found during the JIS C 5030 temperature cycle test. |
| Vibration Resistance | No functional defect was found during the JIS C 5025 vibration test. Contact resistance is 5 m? or less. |
| Waterproofing | No abnormality such as flooding was found when left under water pressure of 0.4 kgf/cm2 at regular working conditions for 24 hours or more. |