- mpn18031208
- brandname: Osg
- manufacturername: Osg
Attributes
| Key | Value |
|---|
| Application | For Aluminum : 6061, 70. |
| Coolant Fed | Coolant Through |
| Coolant Through | Yes |
| Country of Origin (subj. | Japan |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 1.0313 |
| Depth x Dia. Ratio | 5xD |
| Depth:Dia. Ratio | 5xD |
| Drill Bit Dimension Type | Fractional Inch |
| Drill Bit Finish | V |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Material | High Speed Steel |
| Drill Bit Point Angle | 130 Degrees |
| Drill Bit Point Type | R Thinning Point |
| Drill Bit Size | 1 1/32 in |
| Drill Diameter Tolerance | +0.000/-0.033 mm |
| Drill Length Class | Jobber Length |
| Finish | Tin |
| Finish - Machining | V |
| Flute Length | 6 1/2 in |
| Flute Type | Spiral |
| Grade | High Performance |
| Helix Angle | 30 Degrees |
| Item | Jobber Length Drill Bit |
| List Number | 1700 |
| Material | High Speed Steel |
| Material - Machining | High Speed Steel |
| Material Grade - Machin. | High Performance |
| Maximum Drilling Depth | 6 1/2 in |
| Measurement System | Fractional Inch |
| Number of Coolant Holes | 2 |
| Number of Flutes | 2 |
| Overall Length | 228.00 mm |
| Point Type | R Thinning |
| Primary Material Applic. | Stainless Steel, Steel |
| Primary Material Applic. | H, K, M, N, P, S |
| Secondary Material Appl. | Aluminum, Cast Iron, Di. |
| Secondary Material Appl. | H, K, M, N, P, S |
| Series | 1700 |
| Shank Dia. | 25.40 mm |
| Shank Length | 77.00 mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Sheeter Drill | No |
| Standards | Not Rated |