| Application | For Aluminum : Casting, Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Die Steels : 20 HrC, Stainless Steels : 400, Stainless Steels : 17-4PH, Hardened Steels : 35 HrC |
| Coolant Fed | Coolant Through |
| Coolant Through | Yes |
| Country of Origin (subject to change) | Japan |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.1575 |
| Depth x Dia. Ratio, Depth:Dia. Ratio | 5xD |
| Drill Bit Dimension Type, Measurement System | Metric |
| Drill Bit Finish, Finish - Machining | WD1 |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Material, Material, Material - Machining | Carbide |
| Drill Bit Point Angle | 140 Degrees |
| Drill Bit Point Type | R Thinning Point |
| Drill Bit Size | 4.00 mm |
| Drill Diameter Tolerance | +0.000/-0.018 mm |
| Drill Length Class | Jobber Length |
| Finish | Tin |
| Flute Length | 36.00 mm |
| Flute Type | Spiral |
| Grade, Material Grade - Machining | High Performance |
| Helix Angle | 30 Degrees |
| Item | Jobber Length Drill Bit |
| List Number, Series | 5610 |
| Maximum Drilling Depth | 36 mm |
| Number of Coolant Holes, Number of Flutes | 3 |
| Overall Length | 86.00 mm |
| Point Type | R Thinning |
| Primary Material Application | Cast Iron, Stainless Steel, Steel, Tool and Die Steel |
| Primary Material Application ISO Code | K, M, P |
| Secondary Material Application | Aluminum, Hardened Steel, Stainless Steel |
| Secondary Material Application ISO Code | H, M, N |
| Shank Dia. | 5.00 mm |
| Shank Length | 50 mm |
| Shank Type, Shank Type - Machining | Straight |
| Sheeter Drill | No |
| Standards | Not Rated |
