- mpnBSK32-1"-13MM-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 2.0? |
| Axial Motion | 0.020 in, 0.50 mm |
| B1 Shaft Penetration | 1.099 in, 27.9 mm |
| B2 Shaft Penetration | 1.099 in, 27.9 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 200 lb-in, 22.60 Nm |
| Dynamic Torque Reversing | 100 lb-in, 11.30 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Set Screw | M6 |
| Hex Wrench Size | 3.0 mm |
| Hub Width LH | 0.810 in, 20.55 mm |
| Keyway K1 | 1/4 in |
| Keyway K2 | 5 mm |
| Large Bore B1 | 1.000 in |
| Length L | 2.313 in / 58.8 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminu. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 4 ea |
| Outer Diameter OD | 2.000 in, 50.8 mm |
| Parallel Misalignment | 0.010 in, 0.25 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 7.2 Nm |
| Small Bore B2 | 13 mm |
| Static Torque | 400 lb-in, 45.2 Nm |
| Temperature | -40?F to 200?F |
| Torsional Stiffness | 950 lb-in/Deg, 108 Nm/D. |
| UPC | 63452917131 |
| Weight (lbs.) | 0.4400 |