- mpnDSD16-1/2"-6MM-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 2.0? |
| Axial Motion | 0.012 in, 0.30 mm |
| B1 Shaft Penetration | 0.467 in, 11.8 mm |
| B2 Shaft Penetration | 0.654 in, 16.6 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 25 lb-in, 2.80 Nm |
| Dynamic Torque Reversing | 12.5 lb-in, 1.40 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Set Screw | M4 |
| Hex Wrench Size | 2.0 mm |
| Hub Width LH | 0.467 in, 11.8 mm |
| Large Bore B1 | 0.500 in |
| Length L | 1.374 in / 34.9 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs and Center Spacer:. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 4 ea |
| Outer Diameter OD | 1.000 in, 25.4 mm |
| Parallel Misalignment | 0.006 in, 0.15 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 2.2 Nm |
| Small Bore B2 | 6 mm |
| Static Torque | 50 lb-in, 5.6 Nm |
| Temperature | -10?F to 200?F |
| Torsional Stiffness | 61 lb-in/Deg, 6.9 Nm/Deg |
| UPC | 63452915481 |
| Weight (lbs.) | 0.0690 |