Attributes

Key Value
Angular Misalignment3?
Axial Motion0.010 in, 0.25 mm
B1 Shaft Penetration0.720 in, 18.3 mm
B2 Shaft Penetration0.720 in, 18.3 mm
Bore Tolerance+.001 in / -.000 in, +.025 mm / -.000 mm
Country of OriginUSA
Dynamic Torque Non-Reversing25 lb-in, 2.83 Nm
Dynamic Torque Reversing12.5 lb-in, 1.41 Nm
Finish SpecificationBright
Forged Set ScrewM5
Hex Wrench Size2.5 mm
Large Bore B110 mm
Length L1.500 in / 38.1 mm
ManufacturerRuland Manufacturing
Material SpecificationType 303 Austenitic, Non-Magnetic Bar
Maximum Speed6,000 RPM
Moment of Inertia0.0381 lb-in
Note 1Torque ratings are at maximum misalignment.
Note 2Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 3Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of.
Number of Screws4 ea
Outer Diameter OD1.000 in, 25.4 mm
Parallel Misalignment0.015 in, 0.38 mm
Screw FinishBlack Oxide
Screw MaterialAlloy Steel
Seating Torque4 Nm
Small Bore B20.313 in
Static Torque50.1 lb-in, 5.66 Nm
Temperature-40?F to 350?F
Torsional Stiffness0.046 Deg/lb-in, 0.41 Deg/Nm
UPC63452919493
Weight (lbs.)0.4840
© 2025 · Data Alchemy · Version 66 · ts:1759032749
prev