mpn:
brand:
manufacturer:
MPN:
Weight:
0.05
Weight:
0.05 LB
Preferred Price:
126.27
Price:
126.27
Min Simple Price:
69.0
Absolute Min Price:
97.98
Min Price:
97.98
Dimensions:
[5.0, 3.0, 1.0]
qty:
21
simpleSku:
TA0MTg:::MWC30-10-9-A
sku:
TA0MTg::QG:MWC30-10-9-A@y0
condition:
11
seller:
Zoro
amzMan:
ruland manufacturing co., inc.
HazMat:
False
DropShip:
False
Attributes
| Key ^ | Value |
|---|---|
| Angular Misalignment | 3? |
| Axial Motion | 0.25 mm |
| B1 Max Shaft Penetration, B2 Max Shaft Penetration | 18.2 mm |
| Balanced Design, Full Bearing Support Required?, Zero-Backlash? | Yes |
| Bore (B1), Max. Bore (mm) | 10 mm |
| Bore Dia. | 10mm x 9mm |
| Bore Tolerance | +0.025 mm / -0.000 mm |
| Cap Screw, Screw Size, Screw Size (mm) | M4 |
| Clearance Dia. (In.) | 0.787 in |
| Clearance Dia. (mm) | 20 |
| Country of Origin | USA |
| Country of Origin (subject to change) | United States |
| Dynamic Torque Non-Reversing | 3.30 Nm |
| Dynamic Torque Reversing | 1.65 Nm |
| Finish | Bright |
| Finish Specification | Bright, No Plating |
| Hex Wrench Size | 3.0 mm |
| Item, Item - Motion Control Couplings | Motion Control Coupling |
| Length (L) | 38.0 mm |
| Length through Bore | 17.65 mm |
| Length through Bore (In.) | 0.695 |
| Length through Bore (mm) | 17.65 |
| Manufacturer | Ruland Manufacturing |
| Material Specification | 7075-T651 Extruded and Drawn Aluminum Bar |
| Material, Material - Couplings | Aluminum |
| Max. Angular Misalignment | 3 Degrees |
| Max. Axial Misalignment (In.) | +/-0.015 |
| Max. Parallel Misalignment (In.) | 0.01 in |
| Max. RPM, Maximum Speed | 6,000 RPM |
| Max. Temp. | 225 Degrees F |
| Max. Temp. Range (F) | 225 Degrees |
| Min. Bore (mm) | 9 |
| Moment of Inertia | 7.958 x10 |
| Note 1 | Torque ratings are at maximum misalignment. |
| Note 2 | Performance ratings are for guidance only. The user must determine suitability for a particular application. |
| Note 3 | Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance. |
| Number of Screws | 2 ea |
| Outer Diameter (OD) | 30.0 mm |
| Outside Dia. | 30 mm |
| Outside Dia. (In.) | 1.181 |
| Outside Dia. (mm) | 30 |
| Overall Length | 38 mm |
| Overall Length (In.) | 1.496 |
| Overall Length (mm) | 38 |
| Parallel Misalignment | 0.38 mm |
| Rated Torque | 58 in-lb |
| Recommended Shaft Tolerance | +0.000 mm / -0.013 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Screw Type | Cap Screw |
| Seating Torque | 4.6 Nm |
| Shaft Locking Type - Couplings | 1 Piece Clamp |
| Size | MWC30 |
| Small Bore (B2) | 9 mm |
| Static Torque | 6.60 Nm |
| Style | 4-Beam Clamp |
| Tariff Code | 8483.60.8000 |
| Temperature | -40?F to 225?F (-40?C to 107?C) |
| Torque (In.-Lbs.) | 58 |
| Torsional Stiffness | 0.93 Deg/Nm |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.105 |
| UNSPC | 31163003 |
| UPC | 634529212646 |
| Weight (lbs) | 0.130300 |
All Prices
| Img | Seller | Supplier SKU | Requested Price ^ | Calc MOQ Price | MOQ | In Stock | Lead Time | Brand | Weight | Preferred Tier |
|---|---|---|---|---|---|---|---|---|---|---|
 | Zoro | G8136527 | 69.0 | 69.0 | 1 | In Stock | 10 | Ruland | 0.05 | 69.0 @ Qty: 1+ |
 | Ruland | MWC30-10-9-A | 84.94 | 84.94 | 1 | In Stock | Ruland | 0.1303 | 84.94 @ Qty: 1+ | |
| motionindustries.com | 06017447 | 95.07 | 95.07 | 1 | In Stock | Ruland Manufacturing Co Inc | 95.07 @ Qty: 1+ | |||
 | AmazonSC | B016APQ5QG | 103.92 | 103.92 | 1 | In Stock | Ruland | 103.92 @ Qty: 1+ | ||
 | sustainablesupply.com | C1645262 | 119.41 | 119.41 | 1 | In Stock | Ruland Manufacturing | 0.05 | 119.41 @ Qty: 1+ | |
 | Raptor Supplies | AF9VDC | 153.7808805 | 153.7808805 | 1 | In Stock | RULAND MANUFACTURING | 153.7808805 @ Qty: 1+ |
