[Uc] Control Circuit Voltage, Voltage Rating | 110 V - 15...10 % 50/60 Hz |
[Us] Rated Supply Voltage | 208...600 V - 15...10 % |
Ambient Air Temperature For Operation | -10-40 ?C without derating) || 40-60 ?C with current derating 2.2 % per ?C) |
Ambient Air Temperature For Storage | -25-70 ?C |
Application | Fans, Pumps |
Application, Product Destination | asynchronous motors |
Assembly Style | with heat sink |
Brand, Manufacturer, Mfr | Schneider Electric |
California Proposition 65 : WARNING: This product can expose you to chemicals including | Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Catalog Number, Item Number | ATS22C25S6U |
Category | Motors, Actuators, Solenoids and Drivers |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI110805EN |
Communication Data Link | serial |
Communication Port, Communication Port Protocol | Modbus |
Component Name, Series | ATS22 |
Connection, Device Connection | in the motor supply line |
Connector Type | 1 RJ45 |
Control / Drive Type | Soft Start / Stop |
Control Circuit Consumption | 20 W |
Control Voltage | 110 |
Country of Origin | CN - China, China |
Current - Output | 250A |
Current Rating, Output Current | 250 A |
Depth | 299 mm, 11.8 in |
Discrete Input Number, Input Phase | 3 |
Discrete Input Type | LI1, LI2, LI3) logic, 5 mA 20 kOhm |
Discrete Output Number | 2 |
Discrete Output Type | relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
Display | 4 7-Segment Display, 4 LED (Ready, Communication, Run and Trip) |
ECCN | EAR99 |
Electromagnetic Compatibility | conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 || voltage/current impulse level 3 IEC 61000-4-5 |
Enclosure Rating | IP00, NEMA 1 |
Environmental Disclosure | ENVPEP100402EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Factory Setting Current | 240 A |
Family Series | Square D Miscellaneous |
Features, For Use With/Related Products, Weight | - |
Function Available, Special Features | internal bypass |
Gross Weight, Net Weight | 0 lbs |
GTIN | 03606480211201 |
Height | 15.6 in, 425 mm |
Horse Power | 250 |
HP @ 3 Phase - 208V | 75 hp |
HP @ 3 Phase - 240V | 100 hp |
HP @ 3 Phase - 480V | 200 |
HP @ 3 Phase - 575V | 250 hp |
Icl Starter Rating | 250 A connection in the motor supply line for standard applications |
Input Voltage, Output Voltage | 208 to 600V AC |
Inputs/Outputs | 3 Logic Inputs, 1 PTC Probe Analog Input, 2 (NC/NO) Relay Outputs |
Installed Device | 31 |
Interface | RS-485, Serial |
Ip Degree Of Protection, Standard | IP00 |
Item | Soft Start |
Item Type | Soft starter;1 RJ45 |
Made in USA | No |
Manufacturer | Square D |
Manufacturer Part Number | 605336 |
Marking | CE |
Maximum Horse Power Rating | 100 hp 230 V || 200 hp 460 V || 250 hp 575 V || 75 hp 208 V |
Maximum Switching Current | 5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs |
Mercury Free, Rohs Exemption Information | Yes |
Minimum Switching Current | 100 mA 12 V DC relay outputs) |
Motor Type | AC Motor |
Mounting Type | Chassis Mount |
Net Weight | 33 kg |
Network Frequency | 45...66 Hz |
Noise Level | 56 dB |
Number of Motors | 1 |
Operating Position | vertical +/- 10 degree |
Operating Temperature | -10?C ~ 60?C |
Output Current | 0.4...1 Icl adjustable |
Overall Depth, Overall Width | 8.11 in |
Overall Height | 16.73 in |
Package | Box |
Phase | 3 phase |
Physical Interface | RS485 multidrop |
Pollution Degree | level 2 IEC 60664-1 |
Power Dissipation In W | 129 W for standard applications |
Power Supply | 208...600 V - 15...10 ,50...60 HZ - 10...10 |
Product Certifications | C-tick || CSA || GOST || UL || CCC |
Product Or Component Type | soft starter |
Product Specific Application | pumps and fans |
Product Status | Active |
Protection Type | phase failure line || thermal protection motor || thermal protection starter |
Ptc Probe Input | 750 Ohm |
Ramp Time | 1 to 60 sec. |
Range Of Product, Series, Sub Brand | Altistart 22 |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
Relative Humidity | 0-95 % without condensation or dripping water EN/IEC 60068-2-3 |
Series | Altistart ATS 22 Series |
Shock Resistance | 15 gn 11 ms EN/IEC 60068-2-27 |
Standards | C-tick, CCC, CSA Certified, EN/IEC 60947-4-2, GOST, UL Listed, EN/IEC 60947-4-2 |
Start Type | Torque Control Start |
Stop Time | 1 to 60 sec |
Supply Frequency | 50...60 Hz - 10...10 % |
Supply Voltage Limits | 177-660 V |
Sustainable Offer Status | Green Premium product |
Transmission Rate | 4800, 9600 or 19200 bps |
Type | Module |
Type Of Cooling | forced convection |
Type Of Start | start with torque control (current limited to 3.5 In) |
UNSPSC | 39121521 |
UPC, UPC Code | 785901694946 |
Use With | Altistart 22; Asynchronous Motors |
Utilisation Category | AC-53A |
Vibration Resistance | 1 gn 13-200 Hz)EN/IEC 60068-2-6 || 1.5 mm 2-13 Hz)EN/IEC 60068-2-6 |
Voltage - Load | 208 ~ 600V |
Voltage - Supply | 177V ~ 660V |
Warranty | 18 months |
Warranty Description | Contractual Warranty:18 months |
Wattage - Load | 55927 W |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Width | 206 mm, 8.1 in |
With Bypass / No Bypass | With Bypass |