| [Us] Rated Supply Voltage | 115...480 V |
| Back Emf Constant | 49 V/krpm 20 ?C |
| California Proposition 65 : WARNING: This product can expose you to chemicals including | Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Centring Collar Depth | 2.5 mm |
| Centring Collar Diameter | 60 mm |
| China Rohs Regulation | X |
| Circle Diameter Of The Mounting Holes | 82 mm |
| Continuous Power | 1330 W |
| Continuous Stall Current | 4.1 A |
| Continuous Stall Torque | 2.94 N.m 115...480 V three phase |
| Device Short Name | SH3.....P |
| Electrical Connection | straight connector |
| Encoder Type | absolute multiturn SinCos Hiperface |
| Environmental Disclosure | ENVPEP111049EN |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Holding Brake | with |
| Holding Torque | 2 N.m |
| Ip Degree Of Protection | shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5 |
| Key Width | 5 mm |
| Length | 254 mm |
| Maximum Axial Force Fa | 80 N |
| Maximum Current Irms | 17 A |
| Maximum Mechanical Speed | 8000 rpm |
| Maximum Radial Force Fr | 730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm |
| Mercury Free, Pvc Free, Rohs Exemption Information | Yes |
| Motor Flange Size | 70 mm |
| Mounting Holes Diameter | 5.5 mm |
| Mounting Support | international standard flange |
| Net Weight | 3.8 kg |
| Nominal Output Power | 460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase |
| Nominal Speed | 1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase |
| Nominal Torque | 2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase |
| Number Of Motor Poles | 3 |
| Number Of Mounting Holes | 4 |
| Peak Stall Torque | 11.3 N.m 115...480 V three phase |
| Phase | three phase |
| Product Or Component Type | servo motor |
| Range Compatibility | PacDrive 3 |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| Rotor Inertia | 0.807 kg.cm? |
| Shaft Diameter | 14 mm |
| Shaft End | parallel key |
| Shaft Length | 30 mm |
| Speed Feedback Resolution | 128 periods |
| Stator Inductance | 20.3 mH |
| Stator Resistance | 2.7 Ohm |
| Sustainable Offer Status | Green Premium product |
| Torque Constant | 0.72 N.m/A 120 ?C |
| Type Of Cooling | natural convection |
| Warranty | 18 months |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
