mpn:
brand:
manufacturer:
MPN:
Description:
Linear Ball Bearing, Type Open, Inside Dia. 5/8 in, Outside Dia. 1 1/8 in, Material Delrin, Accelerated Speed 450 fps, Between Grooves (mm) 1.105 in, Dimension B -, Dimension C 1.5 in, Dimension C1 1.105 in, Dimension C2 -, Dimension d -, Dimension E -, Dimension F 0.11 in, Dimension G 0.130 in, Dimension T 0.625, Dynamic Load Capacity (N) 320 lbf, For Use With Thomson Shafting, Inside Dia. Tolerance +/-0.001, Maximum Operating Temperature 185 Degrees F, Minimum Operating Temperature 0 Degrees F
Attributes
| Key ^ | Value |
|---|---|
| Accelerated Speed | 450 fps |
| Between Grooves (mm), Dimension C1 | 1.105 in |
| Bore Dia. | 0.625 in |
| Dimension C, Length (In.) | 1.5 in |
| Dimension F, Retention Hole Dia. (mm) | 0.11 in |
| Dimension G | 0.130 in |
| Dimension T | 0.625 |
| Dynamic Load Capacity (Lb.) | 320 |
| For Use With | Thomson Shafting |
| Inside Dia. | 5/8 in |
| Inside Dia. Tolerance | +/-0.001 |
| Item | Linear Ball Bearing |
| Material | Delrin |
| Outside Dia., Required Housing Bore Dia. (In.) | 1.125 in |
| Retention Hole Location | 0.13 in |
| Self-Alignment | Yes |
| Slot Angle (Degrees) | 15 |
| Slot Width (In.) | 0.37 in |
| Temp. Range (F) | 0 - 185 |
| Type | Open |