| ANSI Code, ANSI Number | CNGP4305 |
| Cast Iron (K) Compatibility, Hardened (H) Compatibility | No |
| Chip-Breaker Style | On Two Sides |
| Chip-Breaker, Non Ferrous (N) Compatibility, Stainless (M) Compatibility, Steel (P) Compatibility, Super Alloy (S) Compatibility | Yes |
| Clearance Angle | 0 Degrees |
| Coating, Finish - Machining | AlTiSiN |
| Coolant Fed | Non-Coolant Through |
| Corner Radius | .5 |
| Country of Origin (subject to change) | United States |
| Cutting Application | Turning |
| Cutting Direction | Neutral |
| Cutting Edge Length | 12.90mm |
| For Use With | Toolholders, Boring Bars |
| Grade, Manufacturer Grade | WU10HT |
| Included Angle | 80 Degrees |
| Inscribed Circle, No. of Edges, Number of Cutting Edges | 4 |
| Insert Application | Finishing |
| Insert Code | CNGP43.5 |
| Insert Holding Type | Straight Hole |
| Insert Material, Material, Material - Machining | Carbide |
| Insert Shape | Diamond |
| Insert Size | 4305 |
| Insert Style | CNGP |
| Insert Thickness | 0.1875" |
| ISO Number | CNGP120402 |
| Item | Diamond Turning Insert |
| Measurement System | Fractional Inch |
| Mounting Hole Dia. | 0.203" |
| Mounting Style | Clamp |
| Nose Radius | 0.008" |
| Primary Material Application | Nickel, Stainless Steel, Titanium |
| Primary Material Application ISO Code | M, S |
| Rake | Negative |
| Relief Angle | 0 Degrees |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper, Steel |
| Secondary Material Application ISO Code | N, P |
| Shape | Rhombic |
| Thickness | 3 |
| Workpiece Compatibility | Nonferrous (N), Stainless (M), Steel (P), Super Alloy (S) |
