| ANSI Code, ANSI Number, Insert Code | TPU433 |
| Cast Iron (K) Compatibility, Hardened (H) Compatibility, Non Ferrous (N) Compatibility, Super Alloy (S) Compatibility | Yes |
| Chip-Breaker, Stainless (M) Compatibility, Steel (P) Compatibility | No |
| Clearance Angle | 11 Degrees |
| Coating | Uncoated |
| Corner Radius | 0.0468 in |
| Country of Origin (subject to change) | Germany |
| Cutting Application | Outside and Inside Diameter Turning |
| Cutting Direction | Neutral |
| Cutting Edge Length | 22 mm |
| Finish - Machining | Bright (Uncoated) |
| For Use With | Toolholders, Boring Bars |
| Grade, Manufacturer Grade | THM |
| Included Angle | 60 Degrees |
| Inscribed Circle | 1/2 in |
| Insert Application | Finishing |
| Insert Holding Type | No Screw Hole |
| Insert Material, Material, Material - Machining | Carbide |
| Insert Shape, Shape | Triangle |
| Insert Size | 433 |
| Insert Style | TPU |
| Insert Thickness | 0.1875" |
| ISO Number | TPUN220412 |
| Item | Triangle Turning Insert |
| Measurement System | Fractional Inch |
| Mounting Style | Clamp |
| No. of Edges, Number of Cutting Edges, Thickness | 3 |
| Nose Radius | 0.047" |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Hardened Steel, Magnesium, Nickel, Titanium |
| Primary Material Application ISO Code | H, K, N, S |
| Rake | Positive |
| Relief Angle | 11 Degrees |
| Workpiece Compatibility | Cast Iron (K), Hardened (H), Nonferrous (N), Super Alloy (S) |
