mpn:
brand:
manufacturer:
MPN:
Description:
Sleeve Anchor, System of Measurement Inch, Anchor Diameter 3/8 in, Overall Length 4 in, Thread Size 5/16 In., Drive Type External Hex, Head Type Hex, Nut Width 0.4889 in, Washer Outside Diameter 0.7047 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Drill Bit Size Not Applicable, Compatible Material Block, Concrete, Masonry, Minimum Installation Torque Not Applicable, Maximum Installation Torque Not Applicable, Minimum Installation Depth 1 1/2 in
Attributes
| Key ^ | Value |
|---|---|
| Anchor Diameter | 3/8" |
| Anchor Length | 4 in |
| Compatible Material | Concrete; Hollow Block; Brick |
| Drive Type | Hex |
| Finish | Zinc Plated |
| Head Type | Hex Nut |
| ICC Approved for Cracked Concrete, ICC Approved for Un-Cracked Concrete | No |
| Item | Sleeve Anchor |
| Material Grade | Not Graded |
| Material Type | Carbon Steel |
| Min. Embedment | 1 1/2 in |
| Minimum Installation Depth | 1-1/2" |
| Overall Length | 4" |
| Thread Size | 5/16" |