- mpnP15ST4P033
- brandname: Plastec
- manufacturername: Plastec
Attributes
| Key | Value |
|---|
| Agency Compliance | AMCA and CSA certified,. |
| Airflow @ 0.125 in SP | 250 cfm |
| Airflow @ 0.250 in SP | 275 cfm |
| Airflow @ Static Pressu. | 250 cfm @ 0.125 in SP /. |
| Assembly | Fully Assembled |
| Bearing Type | Ball, Ball Bearing, Sea. |
| Blower RPM | 1,725 RPM |
| CFM @ 0.125-In. SP | 250 |
| CFM @ 0.200-In. SP | 250 |
| CFM @ 0.250-In. SP | 275 |
| Corrosion Resistant | Yes |
| Country of Origin (subj. | United States |
| Current | 2.34/1.17 A |
| dBA @ 5 Feet | 54 dBA |
| Depth (In.) | 17.04 in |
| Discharge Position | Bottom Horizontal, Down. |
| Drive Type | Direct Drive |
| Flange Size | Not Applicable |
| Flange Type | Non-Flanged |
| Flange Type_broad | Outlet |
| For Air Type | Contaminated, Damp, Dir. |
| For Fan Speed (Dependen. | 1,725 RPM to 1,725 RPM |
| Frequency | 50/60 Hz |
| Full Load Amps | 2.34/1.17 |
| Height (In.) | 21.93 in |
| Housing Finish | Polypropylene |
| Housing Height | 21 7/8 in |
| Housing Material | Polypropylene |
| Housing Width | 13 7/8 in |
| Hz | 50/60 Hz |
| Includes | Motor Mounting Base |
| Includes Drive Package | Yes |
| Includes Motor | Yes |
| Includes Mounting Hardw. | Yes |
| Inlet Dia. (In.) | 4.92 in |
| Inlet Diameter | 4 7/8 in |
| Inlet Type | Single-Inlet |
| Item | Plastec Blower |
| Material | Plastic Wheel & Plastic. |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Max. Inlet Temp. (Deg. . | 140 Degrees F |
| Maximum Ambient Tempera. | -13 Degrees F |
| Maximum Fan Speed | 1,725 RPM |
| Maximum Inlet Air Tempe. | 140 Degrees F |
| Maximum Static Pressure | 3/4 in wc |
| Minimum Ambient Tempera. | -40 Degrees C |
| Minimum Fan Speed | 1,725 RPM |
| Motor Enclosure | Totally Enclosed Fan Co. |
| Motor Enclosure Design | Totally Enclosed Fan-Co. |
| Motor Enclosure Design_. | Totally Enclosed Motor |
| Motor Frame | 71 |
| Motor Frame Designation | 71 |
| Motor Horsepower | 1/3 hp |
| Motor HP | 1/4 hp |
| Motor RPM | 1,725 RPM |
| Motor Speed | 1,725 RPM |
| Motor Type | General Duty, Three Pha. |
| Mount Type | Motor Mount |
| Mounting Orientation | Multiposition |
| Nameplate Voltage | 230/460V AC |
| Nominal Voltage | 230/460V AC |
| Number of Discharge Pos. | 2 |
| Number of Inlets | 1 |
| Outlet Dia. (In.) | 4.47 in |
| Outlet Diameter | 4 3/8 in |
| Outlet Height | Not Applicable |
| Outlet Shape | Round |
| Outlet Shape_broad | Round |
| Outlet Size | 4 3/8 in diameter |
| Outlet Width | Not Applicable |
| Overall Depth | 17 in |
| Overall Height | 21 7/8 in |
| Overall Width | 13 7/8 in |
| Phase | 3 |
| Product Type | Plastec Blower |
| Rotation | CCW |
| Shaft Dia. (In.) | 14 mm |
| Shaft Diameter | 14 mm |
| Sound Level | 54 dBA @ 5 ft |
| Standards | AMCA Certified, CSA Cer. |
| Thermal Overload Protec. | Yes |
| Type | Direct Drive Forward Cu. |
| Voltage | 230/460 |
| Wheel Dia. (In.) | 6 in |
| Wheel Diameter | 6 in |
| Wheel Dimensions | 6 in Dia. x 3 3/8 in W |
| Wheel Material | Polypropylene |
| Wheel Type | Forward Curve |
| Wheel Width | 3 3/8 in |
| Wheel Width (In.) | 3.38 in |
| Width (In.) | 13.88 in |