- mpnBC12-7MM-3/16"-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 1.5? |
| Axial Motion | 0.010 in, 0.25 mm |
| B1 Shaft Penetration | 0.570 in, 14.5 mm |
| B2 Shaft Penetration | 0.570 in, 14.5 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 20 lb-in, 2.25 Nm |
| Dynamic Torque Reversing | 10 lb-in, 1.13 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Clamp Screw | M2.5 |
| Hex Wrench Size | 2.0 mm |
| Hub Width LH | 0.410 in, 10.40 mm |
| Large Bore B1 | 7 mm |
| Length L | 1.188 in / 30.2 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs: 2024-T351 Aluminu. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 2 ea |
| Outer Diameter OD | 0.750 in, 19.1 mm |
| Parallel Misalignment | 0.004 in, 0.10 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 1.21 Nm |
| Small Bore B2 | 0.188 in |
| Static Torque | 40 lb-in, 4.5 Nm |
| Temperature | -40?F to 200?F |
| Torsional Stiffness | 120 lb-in/Deg, 14 Nm/Deg |
| UPC | 63452914029 |
| Weight (lbs.) | 0.0330 |