Attributes

Key Value
Brand & SeriesLOCTITE 680
CharacteristicsGreen
Chemical BaseMethacrylate Ester
Clean Up MethodSolvent, Wire Brush
Close-Fitting Parts Sub.For Loose Fitting Parts.
ColorGreen
Color FamilyGreen
Compatible MaterialsSteel
Compatible Primer SeriesExcel 612
Compound TypeHigh Strength, Room Tem.
Container Size0.3 fl oz
Container Size - Adhesi.0.34 oz
Container TypeBottle
Container Type - Adhesi.Bottle
Country of Origin (subj.United States
Cure TypeAnaerobic
Filling Gap SizeUp to 0.015"
Flash Point200 Degrees F
For Material TypeSteel
Full Cure24 hr
Full Cure Time1 day
Gap Fill Size0.015 in
Gap Fill Size - Retaini.0.015 in
High-Temperature SubheadFor Loose Fitting Parts.
ItemRetaining Compound
Loose-Fitting Parts Sub.High Strength, Standard
Max. Temp. (F)300 Degrees F
Maximum Gap Fill Size0.015 in
Maximum Operating Tempe.355 Degrees F
Maximum Viscosity1,850 cps
Minimum Operating Tempe.-65 Degrees F
Minimum Viscosity650 cps
Non-ToxicNo
Operating Temperature R.-65 Degrees F to 355 .
Optimal Usage Temperatu.-65 Degrees to 355 Deg.
Physical FormLiquid
PrimerT
Primer RequiredYes
Product FormLiquid
Product TypeRetaining Compound
Retaining Compound Prop.For Loose-Fitting Parts.
Retaining Compound Stre.High
Retaining Compounds Pro.For Loose Fitting Parts.
Series680
Shear Strength4,030 psi
Shear Strength (PSI)4,000
Size10ml
Specific Gravity1.1
StandardsABS Approved, CFIA List.
Storage Requirements8 Degrees to 21 Degree.
VOC Content4.74 g/L
Working Time4 min
Working Time Range5 min and Under
© 2025 · Data Alchemy · Version 60 · ts:1760052239
prev


As an Amazon Associate I earn from qualifying purchases.

1759634564.2181