- mpn4F07P05301S
- brandname: Flint & Walling
- manufacturername: Flint & Walling
Attributes
| Key | Value |
|---|
| Amps | 6 A |
| Amps AC | 6.0 |
| Built-In Check Valve | Yes |
| Compliance | CSA/CUS |
| Control Box Required | Yes |
| Country of Origin (subj. | United States |
| Discharge Dia. | 1 1/4 in |
| Discharge Head Material | Thermoplastic |
| Discharge Port (In.) | 1-1/4 |
| Flow Ranges (GPM) | 2 - 13 |
| Flow Rate @ 100 Ft. @ 4. | 8.5 gpm |
| Flow Rate @ 100 Ft. @ 5. | 7.5 gpm |
| Flow Rate @ 150 Ft. @ 4. | 6.2 gpm |
| Flow Rate @ 150 Ft. @ 5. | 4.7 gpm |
| GPM | 7 |
| GPM @ Vertical Depth to. | 8 |
| GPM @ Vertical Depth to. | 6 |
| GPM @ Vertical Depth to. | 11 |
| GPM @ Vertical Depth to. | 9 |
| GPM @ Vertical Depth to. | 12 |
| GPM of Water @ 100 Ft @. | 8, 6 |
| GPM of Water @ 125 Ft @. | 7, 4 |
| GPM of Water @ 150 Ft @. | 6, 3 |
| GPM of Water @ 175 Ft @. | 5, 2 |
| GPM of Water @ 20 Ft @ . | 11, 9 |
| GPM of Water @ 40 Ft @ . | 8, 7 |
| GPM of Water @ 60 Ft @ . | 7, 6 |
| GPM of Water @ 80 Ft @ . | 7, 6 |
| Height (In.) | 3-3/4 |
| HP | 1/2 hp |
| Impeller Material | Noryl |
| Item | Submersible Deep Well P. |
| Length (In.) | 27-1/2 |
| Max. Head | 310 ft |
| Max. Head (Ft.) | 310 |
| Max. Operating Temp. | 86 Degrees F |
| Max. Operating Temp. (F) | 86 |
| Motor Enclosure | Totally Enclosed Nonven. |
| Nominal Flow Rate | 7 gpm |
| Number of Stages | 10 |
| Number of Wires | 3 |
| Phase | 1 |
| Phase - Pumps | 1 |
| Pump Bearings | Sleeve |
| Pump Material | Thermoplastic |
| Pump-Motor Shell | Stainless Steel |
| Rated Voltage | 230V AC |
| Screen Material | Noryl |
| Seal Type | Lip Seal |
| SF Amps | 6.0 |
| Shaft Material | Stainless Steel |
| Shut Off (PSI) | 134 |
| Stages | 10 |
| Tank PSI | 20, 30, 40, 50, 60 |
| Type | Deep Well Submersible |
| Voltage | 230 |
| Well Capacity | Average |
| Width (In.) | 3-3/4 |