- mpn1469490000
- brandname: Mayer Electric Supply
- manufacturername: Mayer Electric Supply
Attributes
| Key | Value |
|---|
| AC current consumption | 1,23 A @ 230 V AC / 2,4. |
| AC failure bridging tim. | > 20 ms @ 230 V AC / > . |
| AC input voltage range | 85...264 V AC (derating. |
| Approvals | CE, CULUS, EAC, TUEV |
| Capacitive load | unrestricted |
| Certificate no. (cULus) | E258476 |
| Conductor cross-section. | 12 |
| Conductor cross-section. | 26 |
| Conductor cross-section. | 2.5?mm? |
| Conductor cross-section. | 0.5?mm? |
| Conductor cross-section. | 6?mm? |
| Conductor cross-section. | 0.5?mm? |
| Connection system | Screw connection |
| Contact load (NO contac. | max. 30 V DC / 1 A |
| Continous output curren. | 10 A @ 55 ?C, 2.5 A @ 7. |
| DC current consumption | 1,18 A @ 370 V DC / 2,4. |
| DC input voltage range | 80...370 V DC (Derating. |
| Degree of efficiency | 90% |
| Depth | 100?mm |
| Depth (inches) | 3.937?inch |
| Earth leakage current, . | 3.5?mA |
| eClass 10.0 | 27-04-07-01 |
| eClass 9.0 | 27-04-07-01 |
| eClass 9.1 | 27-04-07-01 |
| Electrical machine equi. | Acc. to EN60204 |
| ETIM 6.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| Floating contact | Yes |
| For use with electronic. | Acc. to EN50178 / VDE01. |
| Frequency range AC | 47...63 Hz |
| Height | 125?mm |
| Height (inches) | 4.921?inch |
| Housing version | Metal, corrosion resist. |
| Input frequency | 47...63 Hz |
| Input fuse (internal) | Yes |
| Inrush current | max. 15 A |
| Insulation voltage inpu. | 2?kV |
| Insulation voltage outp. | 0.5?kV |
| Insulation voltage, inp. | 3?kV |
| Interference immunity t. | EN 61000-4-2 (ESD), EN . |
| Limiting of mains volta. | According to EN 61000-3. |
| Max. perm. air humidity. | 5 %?95 % RH |
| Mounting position, inst. | on terminal rail TS 35 |
| MTBF | > 500,000 h in accordan. |
| Net weight | 1,018.5?g |
| Noise emission in accor. | Class B |
| Nominal output current . | 10 A @ 55 ?C |
| Number of terminals | 3 for L/N/PE, 6 (++,--,. |
| Operating temperature | -25 ?C...70 ?C |
| Operating temperature, . | 70??C |
| Operating temperature, . | -25??C |
| Output power | 240?W |
| Output voltage | 22...28 V (adjustable v. |
| Overload protection | Yes |
| Parallel connection opt. | yes, max. 5 |
| Pollution severity | 2 |
| Power factor (approx.) | > 0.94 @ 230 V AC / > 0. |
| Power loss, idling | 2?W |
| Power loss, nominal load | 24?W |
| Protection against dang. | Acc. to VDE0106-101 |
| Protection against inve. | Yes |
| Protection against over. | Yes |
| Protection against reve. | 30?35 V DC |
| Protection class | I, with PE connection |
| Protection degree | IP20 |
| Protective separation /. | VDE0100-410 / acc. to D. |
| Ramp-up time | ? 100 ms |
| Rated input voltage | 100...240 V AC (wide-ra. |
| Rated output voltage | 24 V DC ? 1 % |
| REACH SVHC | Lead 7439-92-1 |
| Recommended back-up fuse | 4 A / DI, safety fuse10. |
| ROHS | Conform |
| Safety extra-low voltage | SELV according to EN 60. |
| Safety transformers for. | According to EN 61558-2. |
| Shock resistance IEC 60. | 15 g In all directions |
| Short-circuit protection | Yes |
| Storage temperature | -40 ?C...85 ?C |
| Storage temperature, ma. | 85??C |
| Storage temperature, mi. | -40??C |
| Surge protection | Varistor |
| Tightening torque, max. | 0.6?Nm |
| Tightening torque, min. | 0.5?Nm |
| UL File Number Search | E258476 |
| Vibration resistance IE. | 1 g according to EN 501. |
| Width | 60?mm |
| Width (inches) | 2.362?inch |
| Wire connection cross s. | 2.5?mm? |