- mpnDSD10-1/4"-5MM-A
- brandname: Ruland
- manufacturername: Ruland
Attributes
| Key | Value |
|---|
| Angular Misalignment | 1.0? |
| Axial Motion | 0.004 in, 0.10 mm |
| B1 Shaft Penetration | 0.458 in, 11.6 mm |
| B2 Shaft Penetration | 0.458 in, 11.6 mm |
| Bore Tolerance | +.001 in / -.000 , +.03. |
| Country of Origin | USA |
| Dynamic Torque Non-Reve. | 7.5 lb-in, 0.85 Nm |
| Dynamic Torque Reversing | 3.75 lb-in, 0.43 Nm |
| Finish Specification | Sulfuric Anodized MIL-A. |
| Forged Set Screw | M3 |
| Hex Wrench Size | 1.5 mm |
| Hub Width LH | 0.328 in, 8.3 mm |
| Large Bore B1 | 0.250 in |
| Length L | 0.937 in / 23.8 mm |
| Manufacturer | Ruland Manufacturing |
| Material Specification | Hubs and Center Spacer:. |
| Maximum Speed | 10,000 RPM |
| Note 1 | Stainless steel hubs ar. |
| Note 2 | Torque ratings are at m. |
| Note 3 | Performance ratings are. |
| Note 4 | Torque ratings for the . |
| Number of Screws | 2 ea |
| Outer Diameter OD | 0.590 in, 15.0 mm |
| Parallel Misalignment | 0.002 in, 0.05 mm |
| Screw Finish | Black Oxide |
| Screw Material | Alloy Steel |
| Seating Torque | 0.92 Nm |
| Small Bore B2 | 5 mm |
| Static Torque | 15 lb-in, 1.7 Nm |
| Temperature | -10?F to 200?F |
| Torsional Stiffness | 27 lb-in/Deg, 3.0 Nm/Deg |
| UPC | 63452915452 |
| Weight (lbs.) | 0.0170 |