- mpn33115-S1AG
- brandname: Liquidynamics
- manufacturername: Liquidynamics
Attributes
| Key | Value |
|---|
| Agency Compliance | ISO |
| Application | Diesel Exhaust Fluid, A. |
| Compatible Chemicals | Acetic Acid 20%, Ammoni. |
| Cord Length | 54 in |
| Country of Origin (subj. | Italy |
| DEF Compatible | Yes |
| Diesel Exhaust Fluid Co. | Yes |
| Discharge Connection Ty. | Hose Barb |
| Discharge Tube Outlet ID | 3/4 in |
| Discharge Tube Outlet OD | 1 in |
| Duty Cycle | Intermittent |
| Explosion Proof | No |
| Food Grade | No |
| For Container Size | 55 gal, 275 gal, 330 gal |
| For Container Type | Drum, Tote |
| For Media Type | Acetic Acid, Ammonium H. |
| For Use With | Anti-Freeze, Clean Wate. |
| Frequency (Hz) | 60 |
| Full Load Amps | 4.5 |
| Gasket Material | EPDM |
| Gear Lube | NT |
| GPM | 8 |
| Grease | NT |
| Height Above Container | 12 in |
| Hose Cover Material | Thermal Plastic |
| Hose Inside Dia. | 3/4 in |
| Hose Length | 12 ft |
| Hose Material | Peroxide Cured EPDM |
| Hose Outside Dia. | 1 in |
| Hose Tube Material | EPDM |
| Housing Material | Polypropylene / EPDM |
| Housing Material - Pumps | Polypropylene |
| HP | 1/10 |
| Hz | 60 |
| Includes | Digital Turbine Meter, . |
| Includes Bung Adapter | No |
| Includes Discharge Hose | Yes |
| Includes Nozzle | Yes |
| Includes Spout | Yes |
| Includes Suction Tube | Yes |
| Inlet Size | 3/4" |
| Item | Electric Operated Drum . |
| Manufacturers Warranty . | 30 Days Manufacturing D. |
| Max. Flow Rate | 8 gpm |
| Max. Fluid Temp. | 104 Degrees F |
| Max. GPM for Water | 8 |
| Max. Head | 48 ft. |
| Max. Head - Pumps | 48 ft |
| Max. Head Pressure | 23 psi |
| Max. Liquid Temp. | 104 Degrees F |
| Max. Oil Flow | 8 gpm |
| Max. Outlet Pressure | 23 psi |
| Max. Pressure | 23 psi |
| Max. Temp. | 104 Degrees F |
| Max. Viscosity | 10 cps |
| Metered | Yes |
| Min. Fluid Temp. | 17 Degrees F |
| Motor Enclosure | IP55 |
| Motor HP | 1/10 hp |
| Motor RPM | 1,750 RPM |
| Motor Type | 2 Pole |
| Noise Level | 70 db |
| Not Recommended Chemica. | Acetic Acid (Glacial), . |
| Nozzle Material | Stainless Steel |
| Nozzle Operation | Automatic |
| Number of Phases | 1 |
| Outlet Size | 3/4" |
| Overall Length | 40 in |
| pH Range | 9.8 to 10 |
| Phase | 1 |
| Power Source | Electric |
| Pump Body Material | Polypropylene, EPDM |
| Pump Connection OD | 1 in |
| Pump Connection Type | Hose Barb |
| Rated Voltage | 115V AC |
| RPM | 1730 |
| Runs Dry | Yes |
| Seal Material | EPDM |
| Self-Priming | Yes |
| Spout Connection Type | Integral to Nozzle |
| Spout Discharge Size | 3/4 in |
| Spout Length | 6 in |
| Spout Material | 316 Stainless Steel |
| Standards | CE, IP 55, ISO 22241 |
| Suction Tube ID | 3/4 in |
| Suction Tube Length | 48 in |
| Suction Tube Material | EPDM |
| Suction Tube OD | 1 in |
| Variable Speed | No |
| Voltage | 115VAC |
| Wetted Materials | EPDM, Polypropylene, St. |