- mpnC81669
- brandname: CLEVELAND
- manufacturername: CLEVELAND
CLEVELAND Sq. End Mill,Single End,Carb,7/32" C81669
- Brand: CLEVELAND
- PartNumber: C81669
- PackageQuantity: 1
- Binding: Misc.
- Manufacturer: CLEVELAND
- Label: CLEVELAND
Attributes
| Key | Value |
|---|
| Brand | Cleveland |
| Center Cutting | Yes |
| Construction | General Purpose |
| Corner Radius | 0.000" |
| Cutter Diameter | 7/32 in |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.2188" / 5.56mm |
| Diameter Fractional | 7/32" |
| Dimension Type | Fractional Inch |
| Double Ended | No |
| Drilling Tool Configura. | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Material | Carbide |
| End Mill Style | Square |
| End Style | Corner Radius |
| Finish | TiAlN, TiAlN Coated |
| Finish - Machining | TiAlN |
| Flute Type | Spiral |
| Grade | General Purpose |
| Hand of Spiral Cut | RHS / RHC |
| Hardened (H) Compatibil. | No |
| Helix Angle | 30 deg, 30 Degrees |
| International Shipping | No |
| Item | Square End Mill |
| Length of Cut | 5/8 in, 0.6250" / 15.88. |
| List Number | CEM-SE-3-TA, CEM-SE-3 |
| List Style | CEM-SE-3 |
| Material | Carbide, Solid Carbide |
| Material - Machining | Carbide |
| Material Grade - Machin. | General Purpose |
| Measurement System | Fractional Inch |
| Milling Dia. | 7/32 in |
| Milling Diameter | 7/32" |
| Miniature End Mill | No |
| Mpn | C81669 |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (N) Compati. | Yes |
| Number of Flutes | 3 |
| Overall Length | 2.5000" / 63.50mm, 2-1/. |
| Primary Material Applic. | Cast Iron, Stainless St. |
| Primary Material Applic. | K, M, P |
| Series | CEM-SE-3 |
| Shank | Straight without Flats |
| Shank Dia. | 1/4 in |
| Shank Diameter | 1/4 in, 0.2500" / 6.35mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Single End/Double End | Single End |
| SKU | ZO-G8847973 |
| Stainless (M) Compatibi. | Yes |
| Style | CEM-SE-3-TA |
| SubCategory | Machining/Milling |
| Super Alloy (S) Compati. | No |
| Surface Condition | TiAlN |
| Tool Size | 7/32" x 1/4" x 5/8" x 2. |
| Type | Center Cutting General . |
| UPC | 697334816690 |
All Prices
| Img | Seller | Supplier SKU | Min Price | MOQ | In Stock | Lead Time | Brand | Weight | Preferred Tier |
|---|
 | MRO Supply | 6119479 | 17.99 | 2 | In Stock | | Cleveland | | 17.99 @ 2 |
 | Megadepot | C81669 | 21.51 | 1 | In Stock | | Cleveland | | 21.51 @ 1 |
 | usmegastore.com | C81669 | 22.37 | 1 | In Stock | | Cleveland | | 22.37 @ 1 |
 | Zoro | G8847973 | 22.49 | 1 | 1 | | Cleveland | 0.06 | 22.49 @ 1 |
 | simsupply.com | ZO-G8847973 | 33.63 | 1 | In Stock | | Cleveland | | 33.63 @ 1 |
| grainger.ca | GNFC81669 | 41.88626426 | 1 | In Stock | | CLEVELAND | 1.0 | 41.88626426 @ 1 |
| Grainger | 33GJ77 | 42.0 | 1 | In Stock | 12 | CLEVELAND | | 42.0 @ 1 |