- mpnC81693
- brandname: CLEVELAND
- manufacturername: CLEVELAND
CLEVELAND Sq. End Mill,Single End,Carb,3/4" C81693
- Brand: CLEVELAND
- PartNumber: C81693
- PackageQuantity: 1
- Binding: Misc.
- Manufacturer: CLEVELAND
- Label: CLEVELAND
Attributes
| Key | Value |
|---|
| Availability | In Stock, ships within . |
| Brand | Cleveland |
| Cast Iron (K) Compatibi. | Yes |
| Center Cutting: | Yes |
| Construction: | General Purpose |
| Corner Radius | 0.000" |
| Corner Radius: | 0.000" |
| Current Stock | 2 |
| Cutter Diameter | 3/4 in |
| Cutting Direction | Right Hand |
| Decimal Equivalent: | 0.7500"/ 19.05mm |
| Diameter Fractional: | 3/4" |
| Dimension Type | Fractional Inch |
| Double Ended: | No |
| Drilling Tool Configura. | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Material | Carbide |
| End Mill Style | Square |
| End Style: | Corner Radius |
| Finish | TiAlN, TiAlN Coated |
| Finish - Machining | TiAlN |
| Flute Type | Spiral |
| Hand of Spiral Cut: | RHS/RHC |
| Hardened (H) Compatibil. | No |
| Helix Angle | 30 Degrees, 30 deg |
| International Shipping | No |
| Item | Square End Mill |
| Length of Cut | 1 1/2 in, 1-1/2 in |
| Length of Cut: | 1.5000"/38.10mm |
| List Number | CEM-SE-3-TA, CEM-SE-3 |
| List Style: | CEM-SE-3 |
| Material | HAWA, Carbide, Solid Ca. |
| Material - Machining | Carbide |
| Material Grade - Machin. | General Purpose |
| Material: | Solid Carbide |
| Measurement System | Fractional Inch |
| Milling Dia. | 3/4 in |
| Milling Diameter | 3/4" |
| Miniature End Mill | No |
| Mpn | C81693 |
| MPN | C81693 |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (N) Compati. | Yes |
| Number of Flutes | 3 |
| Number of Flutes: | 3 |
| Overall Length | 4 in |
| Overall Length: | 4.0000"/ 101.60mm |
| Primary Material Applic. | Cast Iron, Stainless St. |
| Primary Material Applic. | K, M, P |
| Series | CEM-SE-3 |
| Shank Dia. | 3/4 in |
| Shank Diameter | 3/4 in |
| Shank Diameter: | 0.7500"/ 19.05mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Shank: | Straight w/o Flats |
| Single End/Double End | Single End |
| SKU | CU-3333474B3032 |
| Stainless (M) Compatibi. | Yes |
| Style | CEM-SE-3-TA |
| SubCategory | Machining/Milling |
| Super Alloy (S) Compati. | No |
| Surface Condition | TiAlN |
| Surface Condition: | TiAIN |
| Tool Size | 3/4" x 3/4" x 1-1/2" x . |
| Type | Center Cutting General . |
| UPC | 697334816935 |
All Prices
| Img | Seller | Supplier SKU | Min Price | MOQ | In Stock | Lead Time | Brand | Weight | Preferred Tier |
|---|
 | MRO Supply | 6119503 | 129.54 | 1 | In Stock | | Cleveland | | 129.54 @ 1 |
 | Megadepot | C81693 | 134.3 | 1 | In Stock | | Cleveland | | 134.3 @ 1 |
 | Zoro | G8848217 | 141.82 | 1 | 1 | | Cleveland | 0.78 | 141.82 @ 1 |
 | usmegastore.com | C81693 | 153.5 | 1 | In Stock | | Cleveland | | 153.5 @ 1 |
 | simsupply.com | CU-3333474B3032 | 192.9 | 1 | In Stock | | Cleveland | | 192.9 @ 1 |
 | sustainablesupply.com | C3017841 | 205.82 | 1 | In Stock | | Cleveland | 0.78 | 205.82 @ 1 |
| grainger.ca | GNFC81693 | 301.78287674 | 1 | In Stock | | CLEVELAND | 1.0 | 301.78287674 @ 1 |