Kyocera

<ul><li>Insert for External Turning, Copying, Boring</li><li>Stainless Steel / HRSA with 4 Cutting Edges</li><li>Improved thermal conductivity by optimum distribution of WC coarse grains in the substrate</li><li>Resists heat concentration at the cutting edge to promote stable machining</li><li>Application: Hard, wear resistant grade for high-speed machining of continuous to light interrupted heat-resistant alloys</li></ul><p>Product Details:</p><ul><li>Insert Style: DNMG</li><li>Insert Size: 441</li><li>Chipbreaker: MQ</li><li>Insert Grade: PR005S</li><li>Material: Carbide</li><li>Coating Process: PVD</li><li>Coating / Composition: MEGACOAT HARD</li><li>[IC] Inscribed Circle (Decimal Inch): 0.5000</li><li>[IC] Inscribed Circle (mm): 12.70</li><li>[S] Thickness (Decimal Inch): 0.2500</li><li>[S] Thickness (mm): 6.35</li><li>[RE] Corner Radius (Decimal Inch): 0.0156</li><li>[RE] Corner Radius (mm): 0.40</li><li>[D1] Hole Diameter (Decimal Inch): 0.2031</li><li>[D1] Hole Diameter (mm): 5.16</li><li>Rake: Negative</li><li>[AN] Relief Angle (Degree): 0</li><li>Included Angle (Degree): 55</li><li>Primary Workpiece Material: Heat Resistant Alloys</li><li>Shape: Diamond</li><li>Cutting Edge Style: Stainless Steel / HRSA</li><li>Insert Hand: Neutral</li><li>Insert Holding Method: Screw</li><li>Number of Cutting Edges: 4</li><li>Application: External Turning, Copying, Boring</li><li>Usage Classification: Continuous</li><li>Hole (Yes/No): Yes</li><li>Cutting Range: Finishing-Medium</li><li>Compatible Holders (Partial): DDHNR...-1504, DDHNL...-1504, DDHNR...-1506, DDHNL...-1506, MDJNR...-12-4B, MDJNL...-12-4B, MDJNR...-16-4D, MDJNL...-16-4D, PDJNR...-16-4D, PDJNL...-16-4D, PDJNR...-15, PDJNL...-15, PDJNR...-15U, PDJNL...-15U, PDHNR...-15, PDHNL...-15, HA32PDUNR15-43, HA32PDUNL15-43, HA40PDUNR15-50, HA40PDUNL15-50, HA50PDUNR15-63, HA50PDUNL15-63, ...-DDUNR4, ...-DDUNL4, ...-DDUNR15-..., ...-DDUNL15-..., ...-PDUNR15-..., ...-PDUNL15-..., ...-PDQNR15-..., ...-PDQNL15-..., ...-PDZN