As an Amazon Associate, we earn from qualifying purchases.

MWS30-12-12-SS, 12mm x 12mm Four Beam Coupling, Stainless | Ruland

Ruland . MWS30-12-12-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing
Attribute00, Attribute0112 mm
Attribute02, Attribute0314.2 mm
Attribute04, Attribute0630.0 mm
Attribute05+0.025 mm / -0.000 mm
Attribute07+0.000 mm / -0.013 mm
Attribute08M5
Attribute09Alloy Steel
Attribute102.5 mm
Attribute11Black Oxide
Attribute124 Nm
Attribute134 ea
Attribute142.50 Nm
Attribute153.0°
Attribute165.00 Nm
Attribute170.38 mm
Attribute1810.00 Nm
Attribute190.25 mm
Attribute200.46 Deg/Nm
Attribute2120.920 x10
Attribute226,000 RPM
Attribute23, Attribute24Yes
Attribute27Type 303 Austenitic, Non-Magnetic Bar
Attribute28-40°F to 350°F (-40°C to 176°C)
Attribute29Bright, No Plating
Attribute30, Label, Man, Publisher, StudioRuland Manufacturing
Attribute31USA
Attribute320.246700
Attribute33, UPC, EAN, EANList, UPCList634529056707
Attribute348483.60.8000
Attribute3531163003
Attribute36Torque ratings are at maximum misalignment.
Attribute37Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute38Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_Attrib, width_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07Recommended Shaft Tolerance
AttributeKey08Forged Set Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Dynamic Torque Reversing
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Static Torque
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Moment of Inertia
AttributeKey22Maximum Speed
AttributeKey23Full Bearing Support Required?
AttributeKey24Zero-Backlash?
AttributeKey25Torque Wrench
AttributeKey26Recommended Hex Key
AttributeKey27Material Specification
AttributeKey28Temperature
AttributeKey29Finish Specification
AttributeKey30Manufacturer
AttributeKey31Country of Origin
AttributeKey32, Weight_AttribWeight (lbs)
AttributeKey33UPC
AttributeKey34Tariff Code
AttributeKey35UNSPC
AttributeKey36Note 1
AttributeKey37Note 2
AttributeKey38Note 3
AttributeKey39Prop 65
DimensionUnitmm
Extra Product NameMWS30-12-12-SS, 12mm x 12mm Four Beam Coupling, Stainless | Ruland
Weight0.246700 0.25
WeightUnitlbs
diameter, height, length, width30.0
keywordsMWS30-12-12-SS, Beam Coupling, Four Beam Coupling
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, ModelNumber, Model_number, Mpns, PartNumber, Part_numberMWS30-12-12-SS
qtyInStock-2
qtySourceFieldMap
snippetRuland part number MWS30-12-12-SS is a 303 stainless steel four beam coupling with 12mm x 12mm bores. Download a 2D/3D CAD file or purchase the MWS30-12-12-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1169.3
tierPrice2153.91
tierPrice3128.27
tierPrice4115.43
Product GroupBISS
ASINB0060M4FKS B08DLTS65Y
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
Amount, List_price146.17
Asin, KeywordB0060M4FKS
BindingMisc.
Bullet_pointFour beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness Operating temperatures range from -40 to 350 degrees F Set screw mounting style installation Single-piece coupling for longer service life than couplings with moving parts Stainless steel for torsional stiffness and resistance to corrosion
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
Currency, CurrencyCodeUSD
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529056707 0634529056707 634529056707
FeatureFour beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
FetchTime1628067995 1651823559 1676958268 1679001201 1690029940 1714685192
Height1.0999999988780001968503935 1.0999999988780003 1026 3.81 393 59
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland MWS30-12-12-SS Set Screw Beam Coupling, Stainless Steel, Metric, 12mm Bore A Diameter, 12mm Bore B Diameter, 30mm OD, 30mm Length, 6.60 Nm Nominal Torque
Item_package_weight0.25
Item_type_keywordbeam-couplings
Length2.199999997756000393700787 2.1999999977560005 5.588000000000001
Linkhttps://m.media-amazon.com/images/I/41ciu+5q6IL._SL75_.jpg https://m.media-amazon.com/images/I/41ciu+5q6IL.jpg https://m.media-amazon.com/images/I/71cbv4bxSvL.jpg
Marketplace_idATVPDKIKX0DER
Material, MaterialTypeStainless Steel
ParentAsinsB08DLTS65Y
ProductCategoryId16411731 biss_display_on_website
ProductGroupBISS BISS Basic
ProductType, ProductTypeNameFLEXIBLE_COUPLINGS
Product_site_launch_date2011-10-28T16:16:38.603Z
Rank1862221 665
Size12 millimeters
SkuRULAND MWS30-12-12-A RULAND MWS30-12-12-SS
String_value12 30
StrippedMpnsMWS301212SS
StyleModern
TypeVARIATION ean gtin upc
URLhttps://m.media-amazon.com/images/I/41ciu+5q6IL._SL75_.jpg
Unitcentimeters inches millimeters pounds
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1.49999999847 1307 2.7940000000000005 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandMWS30-12-12-SS1-211 @ $169.30, 10 @ $153.91, 25 @ $128.27, 50 @ $115.43
ZoroG7820811111 @ $108.99
Raptor SuppliesAF9VGF111 @ $285.54
Digi-Key13602585111 @ $213.79
cbtcompany.comMWS30-12-12-SS11
Applied Industrial10214285111
us.rs-online.com72177416111 @ $147.10
Allied ElectronicsR101815811
RS Online325828011
RS Delivers325-828011111 @ $91.35, 5 @ $87.70, 10 @ $85.87
Allied Electronics7217741611
motionindustries.com02337660111 @ $210.40
sustainablesupply.comC16453351-211 @ $186.53
AmazonSCB08DLTS65Y11
Grainger30UY98111 @ $170.00

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland MWS30-12-12-SS Set Screw Beam Coupling, Stainless Steel, Metric, 12mm Bore A Diameter, 12mm Bore B Diameter, 30mm OD, 30mm Length, 6.60 Nm Nominal Torque
Brand: Ruland
Details
  • Four beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
  • Stainless steel for torsional stiffness and resistance to corrosion
  • Set screw mounting style installation
  • Single-piece coupling for longer service life than couplings with moving parts
  • Operating temperatures range from -40 to 350 degrees F
Listing
BindingMisc.
Product groupBISS Basic
Product typeFLEXIBLE_COUPLINGS
ModelMWS30-12-12-SS
Part numberMWS30-12-12-SS
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
Catalog
FeatureFour beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
CategoryIndustrial & Scientific
MPNMWS30-12-12-SS
UPC634529056707
EAN634529056707
Product groupBISS
Product typeFLEXIBLE_COUPLINGS
ManufacturerRuland Manufacturing
View on Amazon (paid link)