As an Amazon Associate, we earn from qualifying purchases.

DCS26-12-10-A, 3/4" x 5/8" Single Disc Coupling, Aluminum | Ruland

Ruland . DCS26-12-10-A

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute000.7500 in
Attribute010.6250 in
Attribute02, Attribute030.755 in
Attribute041.625 in
Attribute05+0.001 in / -0.000 in
Attribute061.563 in
Attribute070.710 in
Attribute08+0.0000 in / -0.0005 in
Attribute09M4
Attribute10Alloy Steel
Attribute113.0 mm
Attribute12Black Oxide
Attribute134.6 Nm
Attribute142 ea
Attribute1545 lb-in
Attribute161.0°
Attribute1790 lb-in
Attribute180.00 in
Attribute19180 lb-in
Attribute200.010 in
Attribute21625 lb-in/Deg
Attribute220.0944 lb-in
Attribute2310,000 RPM
Attribute24, Attribute25, Attribute26Yes
Attribute29Hubs: 2024-T351 Aluminum Bar, Disc Springs: Type 302 Stainless Steel
Attribute30-40°F to 200°F (-40°C to 93°C)
Attribute31Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize
Attribute32Ruland Manufacturing
Attribute33USA
Attribute34, Weight0.243800
Attribute35634529082409
Attribute368483.60.8000
Attribute3731163008
Attribute38Stainless steel hubs are available upon request.
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, width_AttribHub Width (LH)
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Forged Clamp Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Zero-Backlash?
AttributeKey26Balanced Design
AttributeKey27Torque Wrench
AttributeKey28Recommended Hex Key
AttributeKey29Material Specification
AttributeKey30Temperature
AttributeKey31Finish Specification
AttributeKey32Manufacturer
AttributeKey33Country of Origin
AttributeKey34, Weight_AttribWeight (lbs)
AttributeKey35UPC
AttributeKey36Tariff Code
AttributeKey37UNSPC
AttributeKey38Note 1
AttributeKey39Note 2
AttributeKey40Note 3
AttributeKey41Note 4
AttributeKey42Prop 65
DimensionUnitinch
Extra Product NameDCS26-12-10-A, 3/4" x 5/8" Single Disc Coupling, Aluminum | Ruland
WeightUnitlbs
diameter, height1.625
keywordsDCS26-12-10-A, Single Disc Coupling
length1.563
moq, multiple, tierMinQty11
MPN, SKUDCS26-12-10-A
qtyInStock-2
qtySourceFieldMap
snippetRuland part number DCS26-12-10-A is an aluminum single disc coupling with 3/4" x 5/8" bores. Download a 2D/3D CAD file or purchase the DCS26-12-10-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1108.03
tierPrice298.21
tierPrice381.84
tierPrice473.66
width0.71

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandDCS26-12-10-A1-211 @ $108.03, 10 @ $98.21, 25 @ $81.84, 50 @ $73.66
Applied Industrial10213571511