Diamond Turning Insert, Diamond, 1/2", 80 Degrees, 1/64"

<ul><li>Insert for External Turning, Facing, Boring, Internal Facing</li><li>4 Cutting Edges</li><li>Heat-resistant MEGACOAT coating on cermet with excellent wear resistance</li><li>Application: High speed finishing of gray and nodular cast iron</li></ul><p>Product Details:</p><ul><li>Insert Style: CNMA</li><li>Insert Size: 431</li><li>Insert Grade: PV7005</li><li>Material: Cermet</li><li>Coating Process: PVD</li><li>Coating / Composition: TiC/TiN (MEGACOAT)</li><li>[IC] Inscribed Circle (Decimal Inch): 0.5000</li><li>[IC] Inscribed Circle (mm): 12.70</li><li>[S] Thickness (Decimal Inch): 0.1875</li><li>[S] Thickness (mm): 4.76</li><li>[RE] Corner Radius (Decimal Inch): 0.0156</li><li>[RE] Corner Radius (mm): 0.40</li><li>[D1] Hole Diameter (Decimal Inch): 0.2031</li><li>[D1] Hole Diameter (mm): 5.16</li><li>Rake: Negative</li><li>[AN] Relief Angle (Degree): 0</li><li>Included Angle (Degree): 80</li><li>Primary Workpiece Material: Cast Iron</li><li>Shape: Diamond</li><li>Insert Hand: Neutral</li><li>Insert Holding Method: Screw</li><li>Number of Cutting Edges: 4</li><li>Application: External Turning, Facing, Boring, Internal Facing</li><li>Usage Classification: Continuous</li><li>Hole (Yes/No): Yes</li><li>Cutting Range: Finishing-Medium</li><li>Compatible Holders (Partial): DCLNR...-4…, DCLNL...-4…, DCLNR...-12, DCLNL...-12, MCLNR...-4…, MCLNL...-4…, PCLNR...-4…, PCLNL...-4…, PCLNR...-12, PCLNL...-12, HA...PCLNR12…, HA...PCLNL12…, A...DCLNR4…, A...DCLNL4…, A...DCLNR12…, A...DCLNL12…, S…PCLNR4…, S…PCLNL4…, S…PCLNR12…, S…PCLNL12…</li></ul>