Gravity Conveyors | Raptor Supplies Worldwide

General purpose skate wheel flow rack conveyors each have a bed of skate wheels that allow cartons, totes, and other flat-bottomed items to glide along the rack as they're moved onto or off of it. These racks are designed to install into storage racks to reduce the effort it takes to move items on the rack and boost efficiency in inventory and order-picking tasks. The wheels on the rack are spaced close together to allow the rack to accommodate items of different sizes, but the smallest item on the conveyor should be supported by at least five wheels on three axles at all times. Flow rack conveyors have a narrow bed of skate wheels or rollers that allow cartons, totes, and other flat-bottomed items to glide along the rack. These flow racks are installed into storage racks or pallet racks to reduce the effort it takes to move items onto or off of the racks, which boosts efficiency in inventory and order-picking tasks. They are typically used in the food and beverage industry and other storage or warehousing operations requiring high-density, high-volume storage and movement of the same or similar products. Flow racks are commonly used to support storage and inventory initiatives such as first-in, first-out (FIFO) and can serve as floor-mounted staging areas for manufacturing or logistical processes. This listing is for each. Skate Wheel Material : Plastic Duty Rating : Light-Duty Between Frame Width : 10 3/4 in Frame Finish/Coating : Galvanized Maximum Load Capacity : 175 lb/ft Wheel Bore : 1/3 Wheel Diameter : 1 3/8 in Wheels per Foot : 2.0 Wheel Dia. : 1-3/8 Wheel Material : Plastic Capacity per Ft. : 175 lb. Overall Width : 11 3/4 in Frame Material : Steel Wheel Design : Molded Overall Height : 2 7/16 in Frame Finish : Galvanized Overall Length : 3 ft 2 in Gauge : 16 ga. Item : Flow Rack Conveyor Wheels per Axle : 4 Wheel Bore Diameter : 1/3 in For Use With : For 42 Pallet Rack With Step Beams Flow Rack Type : Skate Wheel Country of Origin (subject to change) :