SuperCut B161H12T3 Hawc Pro Resaw Bandsaw Blade, 161" Long - 1/2" Width; 3 Tooth; 0.025" Thickness

Hawc Pro 161" x 1/2" 3T All Magnate bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine. This high silicon content resaw blade with an aggressive set and modified gullet to increase speed, extend life, and improve the straightness of cut. This blade improves on sawdust removal in a long or thick cut. Hawc Pro is the best all around blade for resawing up to 1/2" thick. It will last longer and cut straighter than conventional bandsaw blades due to its special design and induction hardened teeth. It comes with 0.025” Thickness x 0.045” Kerf. The following bandsaw models use 161 inch ( 13 ft. 5 inch, 13' 5" ) bandsaw blades. Laguna ResawMaster; 18" PowerMatic ( PM1800 : 160" - 161-1/2" )