SK1000-124 by COTEK - 1000W, 24VDC -> 115VAC

This high efficiency microprocessor controlled DC-AC inverter converts 24 Volts DC (Nominal) to 1000 watts of pure sine-wave AC power at 100/110/120 Volts, 50/60 Hz. The unit comes with input battery cable lugs and dual NEMA 5-20R GFCI receptacles. Features include overload, short circuit, over-temperature, under & over voltage protections, low power saving mode to conserve energy. The unit is e-13/ CE / FCC approved and the safety standards of the unit conform to UL-458 specifications. Part Number: COTEK SK1000-124 Features: True sine wave output (THD < 3%) Power ON-OFF remote control Input & output fully isolation Load control cooling fan Advanced microprocessor Output frequency 50/60 Hz switch selectable Low power saving mode to conserve energy Input polarity reverse / under voltage / over voltage protections Output short circuit / overload / over temperature protections Tri-color indicators display input, output level & failure status e-13 / CE / FCC approved 2 year warranty Specifications: AC Voltage: 100 / 110 / 120VAC Continuous Power: 1000W Surge Power: 2000W Waveform: True sine wave (THD < 3%) Frequency: 50 / 60 Hz selectable by DIP switch AC Regulation: +/- 3% Standard Receptacles: US North American GFCI LED Indicator: Input voltage level, output load level and fault status No Load Current Draw: .64A Stand By Current Draw: 0.15A DC Voltage: 24VDC Voltage Range: 21~30VDC Efficiency: 91% Fuse: 20A x 4 Cooling: Loading controlled cooling fan Remote Control: CR6 / CR8 optional Battery Low Shutdown: 21VDC Over Load: Shut off output voltage, re-power on to recover Over Voltage: 30.6VDC Over Temp: Shut off output voltage, auto resets Output Short: Shut off output voltage, re-power on to recover Battery Polarity Reverse: By Fuse Open Safety Standards: Meet UL458 Isolation Resistance: I/P ~ O/P: 100M Ohms / 500VDC EMI Conduction & Radiation: Compliance to FCC class A Dimensions(L x W x H): 15.1 x 7.2 x 3.5 in Weight: 8.8 lbs