As an Amazon Associate, we earn from qualifying purchases.

MDCS15-4-3-A, 4mm x 3mm Single Disc Coupling, Aluminum | Ruland

Ruland . MDCS15-4-3-A

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute004 mm
Attribute013 mm
Attribute02, Attribute039.0 mm
Attribute0415.0 mm
Attribute05+0.03 mm / -0.00 mm
Attribute0618.3 mm
Attribute078.33 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M2
Attribute10Alloy Steel
Attribute111.5 mm
Attribute12Black Oxide
Attribute130.6 Nm
Attribute142 ea
Attribute150.43 Nm
Attribute160.5°
Attribute170.85 Nm
Attribute180.00 mm
Attribute191.7 Nm
Attribute200.05 mm
Attribute215.6 Nm/Deg
Attribute222.247 x 10
Attribute2310,000 RPM
Attribute24, Attribute25, Attribute26Yes
Attribute29Hubs: 2024-T351 Aluminum Bar, Disc Springs: Type 302 Stainless Steel
Attribute30-40°F to 200°F (-40°C to 93°C)
Attribute31Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize
Attribute32Ruland Manufacturing
Attribute33USA
Attribute34, Weight0.016500
Attribute35634529084700
Attribute368483.60.8000
Attribute3731163008
Attribute38Stainless steel hubs are available upon request.
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, width_AttribHub Width (LH)
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Forged Clamp Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Zero-Backlash?
AttributeKey26Balanced Design
AttributeKey27Torque Wrench
AttributeKey28Recommended Hex Key
AttributeKey29Material Specification
AttributeKey30Temperature
AttributeKey31Finish Specification
AttributeKey32Manufacturer
AttributeKey33Country of Origin
AttributeKey34, Weight_AttribWeight (lbs)
AttributeKey35UPC
AttributeKey36Tariff Code
AttributeKey37UNSPC
AttributeKey38Note 1
AttributeKey39Note 2
AttributeKey40Note 3
AttributeKey41Note 4
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameMDCS15-4-3-A, 4mm x 3mm Single Disc Coupling, Aluminum | Ruland
WeightUnitlbs
diameter, height15.0
keywordsMDCS15-4-3-A, Single Disc Coupling
length18.3
moq, multiple, tierMinQty11
MPN, SKUMDCS15-4-3-A
qtyInStock-2
qtySourceFieldMap
snippetRuland part number MDCS15-4-3-A is an aluminum single disc coupling with 4mm x 3mm bores. Download a 2D/3D CAD file or purchase the MDCS15-4-3-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice184.91
tierPrice277.19
tierPrice364.32
tierPrice457.89
width8.33

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandMDCS15-4-3-A1-211 @ $84.91, 10 @ $77.19, 25 @ $64.32, 50 @ $57.89
Applied Industrial10213018011