As an Amazon Associate, we earn from qualifying purchases.

Order DX-55-3/4-1/4 by Gizmo Engineering Drum Suction Pipe without Flowmeter - US Mega Store

Gizmo Engineering . DX-55-3/4-1/4

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerGizmo Engineering
Attribute00, Attribute1235"
Attribute01, Attribute133/4" (sch 80)
Attribute02, Attribute1472 mm [1.06"]
Attribute03, Attribute1518 mm [0.71"]
Attribute04, Attribute16Polypropylene
Attribute05, Attribute17Polyethylene
Attribute06, Attribute183/4" NPT
Attribute07, Attribute19Buna rubber
Attribute08, Attribute2018-8 SS thread
Attribute09, Attribute10, Attribute21, Attribute221/2" NPT
Attribute11, Attribute231/4"
AttributeKey00, AttributeKey12, length_AttribPipe Working Depth
AttributeKey01, AttributeKey13, height_Attrib, width_AttribPipe diameter
AttributeKey02, AttributeKey14Pipe O.D.
AttributeKey03, AttributeKey15Pipe I.D.
AttributeKey04, AttributeKey16Pipe material
AttributeKey05, AttributeKey17Drum Plug material
AttributeKey06, AttributeKey18Thread
AttributeKey07, AttributeKey19Drum Plug Gasket material
AttributeKey08, AttributeKey20Thumbscrew
AttributeKey09, AttributeKey21Thread on elbow
AttributeKey10, AttributeKey22Bottom screen thread
AttributeKey11, AttributeKey23Tubing Compression Fitting
CategoryL1Process Control & Automation
CategoryL2Monitors
CategoryL3Level
CategoryL4Gizmo Engineering DX-55-3/4-1/4
ConditionNEW
DimensionUnitinch
Extra Product NameOrder DX-55-3/4-1/4 by Gizmo Engineering Drum Suction Pipe without Flowmeter - US Mega Store
diameter, height, width0.75
length35.0
moq, multiple, tierMinQty11
MPN, SKUDX-55-3/4-1/4
qtyInStockContact Us
snippet<p><strong>Features: </strong> </p> <ul><li>Draws chemical from the bottom of your drum to eliminate pumping air. </li> <li>The rigid polypropylene pipe can be adjusted so it always reaches the bottom of your drum for perfect flow without pumps becoming air locked. </li> <li>Drums are pumped out nearly completely which will reducing wasted residual chemical. </li> <li>There is a built-in suction screen to keep particles/debris/crystals out of your pump. This screen is replaceable. </li> <li>Uses a 1/2" pipe which is the maximum that can fit into a 3/4" NPT thread of the drum. </li> </ul> <p>The Drum Suction Pipe, pickup tube, or draw tube, is the best way to extract chemicals from drums because they solve the problems with dangling a plastic flexible tubing into a drum. Often the tubing is inserted so it doesn't reach down to the liquid at the bottom of the drum, which results in the pump drawing air. Or the tubing loses it plasticizers over time and cracks, or curls up, which again causes the pump to draw air. Of course you get no warning when this happens. </p> <p><strong>Chemical Resistance: </strong> </p> <ul><li>Aqueous Ammonia (conc.) </li> <li>Aqueous solutions to 100&deg;C </li> <li>Hydrochloric acid (conc.) </li> <li>Nitric acid (30%) </li> <li>Oils (including waste oils) </li> <li>Potassium carbonate (40%) </li> <li>Sodium hydroxide (50%) </li> <li>Sulfuric acid 70% </li> <li>Sodium Hypochlorite </li> </ul>
tierPrice174.26

Distributor offers

SellerSKUMOQIn stockMultiplePrices
usmegastore.comDX-55-3/4-1/41Contact Us11 @ $74.26
heavydutydepot.comDX-55-3/4-1/4211 @ $74.26