Baldwin 6053003RLS Right Hand Lever Strength Electronic Fail Secure 2-3/4" Backset Mortise Lock Body Lifetime Brass Finish

Right Handed Lever Strength Fail Secure Electrical Mortise Lock Fail Secure electrical mortise lock with 2-3/4" backset Lever x Lever Baldwin mortise locks are reversible in the field if needed Latch bolt by knob either side ONLY when solenoid is energized. Latch bolt retracted by key outside and knob inside when solenoid is NOT energized. Inside knob is always free Auxiliary Latch deadlocks latch bolt. Power off locks outside knob Electrical Specifications: Rated Voltage: 24V AC / 24V DC - AC/DC Converter is built inside Operating Voltage Range: 22-26V AC/V DC Test Voltage: 18V AC/V DC Rated Current: 0.35 Amperes (0.4 Amperes Maximum) Duty: Continuous Solenoid Lead Wire Length: 6" Important Feature: Facilitate installation, Solenoid is constructed inside the lock case. Important Notes: 1. Each electrified lock should have its own 24 volt transformer. Two or more locks may be operated in PARALLEL from a single transformer with the proper current rating. DO NOT connect locks in a series from a higher rated transformer. 2. We DO NOT recommend wiring electrified locks to a circuit containing electromagnetic devices as transient voltage can cause damage to the lock. Transient voltage must be suppressed at its source before connecting locks to the circuit. 3. A Varistor at 35 volts (peak-recurrent) may be used for transient voltage protection. 1-hole for latch bolt - Electric strike not available - must order 3rd party Additional Information View Baldwin Manufacturer Warranty Shop All Baldwin Products Do not use prints made from this website to mark distances. Due to individual printers, dimensions on installation instructions may not print at an accurate scale.