U001-0090 | Flow | SDI | Hot Tap | SS | 1.5-10 | 4-20mA | No LCD | Veris

Wetted Materials (Sensor stem mounting adapter isolation valve and nipple) 316 Stainless steel Sensor Tip GF polyphenylene sulfide (PPS) Operating temperature Electronics: 150°F (65°C); LCD: 150°F (65°C) Power required for analog output versions: 8-35 VDC 30mA max. Maximum Pressure Rating: 1000 psi (68.9 bar) @ 70°F (21°C)* 900 psi (62 bar) @ 100°F (37.8°C)* 670 psi (46.1 bar) @ 140°F (60°C)* 225 psi (15.5 bar) @ 180°F (82°C)* Recommended Design Flow Range 1 to 20 ft/sec Extended flow range < 0.3 to 20 fps Pressure Drop 0.5 psi or less @ 10 ft/sec for all pipe sizes 1.5" dia and up. Accuracy To +/- 1% of rate over optimum flow range; Custom wet calibration: On request Straight Pipe Requirement install sensor in straight pipe section with a minimum distance of 10 diameters upstream and 5 diameters downstream to any bend transition or obstruction. Repeatability +/- 0.5% Enclosure Polypropylene with Viton® sealed acrylic cover. Meets NEMA 4X specifications Wire Connections Removable headers with screw type terminals within the electronics housing ½” conduit thread connection. Programming Data Industrial A-301 connector cable and SDI Series software Accessories ASDI Programming Kit A1027 Hot Tap Adapter Nipple * Non-Shock