As an Amazon Associate, we earn from qualifying purchases.

PSMR25-9-6-SS, 9mm x 6mm Four Beam Coupling, Stainless | Ruland

Ruland . PSMR25-9-6-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing Ruland Manufacturing Co., Inc.
Attribute009 mm
Attribute016 mm
Attribute02, Attribute0314.7 mm
Attribute0425.4 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0631.8 mm
Attribute07+0.000 mm / -0.013 mm
Attribute08M4
Attribute09Alloy Steel
Attribute102.0 mm
Attribute11Black Oxide
Attribute121.76 Nm
Attribute134 ea
Attribute141.16 Nm
Attribute153.0°
Attribute162.32 Nm
Attribute170.38 mm
Attribute184.63 Nm
Attribute190.25 mm
Attribute200.91 Deg/Nm
Attribute219.275 x10
Attribute226,000 RPM
Attribute23, Attribute24Yes
Attribute27Type 303 Austenitic, Non-Magnetic Bar
Attribute28-40°F to 350°F (-40°C to 176°C)
Attribute29Bright, No Plating
Attribute30Ruland Manufacturing
Attribute31USA
Attribute320.227300
Attribute33, UPC, EAN, EANList, UPCList634529050415
Attribute348483.60.8000
Attribute3531163003
Attribute36Torque ratings are at maximum misalignment.
Attribute37Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute38Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_Attrib, width_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07Recommended Shaft Tolerance
AttributeKey08Forged Set Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Dynamic Torque Reversing
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Static Torque
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Moment of Inertia
AttributeKey22Maximum Speed
AttributeKey23Full Bearing Support Required?
AttributeKey24Zero-Backlash?
AttributeKey25Torque Wrench
AttributeKey26Recommended Hex Key
AttributeKey27Material Specification
AttributeKey28Temperature
AttributeKey29Finish Specification
AttributeKey30Manufacturer
AttributeKey31Country of Origin
AttributeKey32, Weight_AttribWeight (lbs)
AttributeKey33UPC
AttributeKey34Tariff Code
AttributeKey35UNSPC
AttributeKey36Note 1
AttributeKey37Note 2
AttributeKey38Note 3
AttributeKey39Prop 65
DimensionUnitmm
Extra Product NamePSMR25-9-6-SS, 9mm x 6mm Four Beam Coupling, Stainless | Ruland
Weight0.227300 163.29
WeightUnitlbs
diameter, height, width25.4
keywordsPSMR25-9-6-SS, Beam Coupling, Four Beam Coupling
length31.8
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, Keyword, ModelNumber, Model_number, PartNumber, Part_numberPSMR25-9-6-SS
qtyInStock0
snippetRuland part number PSMR25-9-6-SS is a 303 stainless steel four beam coupling with 9mm x 6mm bores. Download a 2D/3D CAD file or purchase the PSMR25-9-6-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1127.92
tierPrice2116.29
tierPrice396.91
tierPrice487.22
Product GroupBISS
ASINB016APQC2S B08DLT6DC1
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
AsinB016APQC2S
BindingMisc.
Bullet_pointFour beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant Manufactured from 303 stainless steel for increased torque capacity. Smaller bodies than six beam couplings allow them to fit in confined spaces Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
DisplayNameBeam
Externally_assigned_product_identifier, Identifier0634529050415 634529050415
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
FetchTime1626206886 1651824262 1677502985 1678428489 1680043964 1680465029 1682063719 1714684740
Height1 1.0 1000 500 75
IdentifierTypeEAN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland PSMR25-9-6-SS 303 Stainless Steel Beam Coupling, 4-Beam Set Screw Style, 9 mm x 6 mm Bores, 25.4 mm OD, 31.8 mm Length
Item_package_weight163.29
Item_type_keywordbeam-couplings
Label, Publisher, StudioRuland Manufacturing Ruland Manufacturing Co., Inc.
Length5 5.0
Linkhttps://m.media-amazon.com/images/I/51e-uifzQGL._SL75_.jpg https://m.media-amazon.com/images/I/51e-uifzQGL.jpg https://m.media-amazon.com/images/I/61u8Fd8WPHL.jpg
ManRuland Manufacturing Co., Inc.
Marketplace_idATVPDKIKX0DER
Material, MaterialTypeStainless Steel
Maximum_rotational_speed6000.0
ParentAsinsB08DLT6DC1
ProductGroupBISS BISS Basic
ProductTypeFLEXIBLE_COUPLINGS
ProductTypeNameBEARINGS_AND_BUSHINGS FLEXIBLE_COUPLINGS
Product_site_launch_date2015-10-06T08:00:01.000Z
SkuRULAND MANUFACTURING PSMR25-9-6-A RULAND MANUFACTURING PSMR25-9-9-SS RULAND PSMR25-6-6-A RULAND PSMR25-9-6-A RULAND PSMR25-9-9-SS
String_value25.4 31.8 9 x 6
StyleModern
TypeVARIATION ean upc
URLhttps://m.media-amazon.com/images/I/51e-uifzQGL._SL75_.jpg
Unitinches millimeters pounds rpm
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1000 3 3.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandPSMR25-9-6-SS111 @ $127.92, 10 @ $116.29, 25 @ $96.91, 50 @ $87.22
Raptor SuppliesAF9VVL111 @ $249.85
cbtcompany.comPSMR25-9-6-SS11
ZoroG7920044111 @ $105.00
Grainger30VD01111 @ $178.89
Digi-Key136009401101
sustainablesupply.comC16456341-211 @ $198.06
motionindustries.com048061001Not in Stock, Available to Order11 @ $111.98
AmazonTPB016APQC2S111 @ $218.15

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland PSMR25-9-6-SS 303 Stainless Steel Beam Coupling, 4-Beam Set Screw Style, 9 mm x 6 mm Bores, 25.4 mm OD, 31.8 mm Length
Brand: Ruland
Details
  • Four beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications
  • Smaller bodies than six beam couplings allow them to fit in confined spaces
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
  • Manufactured from 303 stainless steel for increased torque capacity.
  • Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant
Listing
BindingMisc.
Product groupBISS Basic
Product typeFLEXIBLE_COUPLINGS
ModelPSMR25-9-6-SS
Part numberPSMR25-9-6-SS
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
Catalog
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
CategoryIndustrial & Scientific
MPNPSMR25-9-6-SS
UPC634529050415
EAN634529050415
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ManufacturerRuland Manufacturing Co., Inc.
View on Amazon (paid link)