As an Amazon Associate, we earn from qualifying purchases.

FCMR38-18-15-A, 18mm x 15mm Six Beam Coupling, Aluminum | Ruland

Ruland . FCMR38-18-15-A

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute0018 mm
Attribute0115 mm
Attribute02, Attribute0327.3 mm
Attribute0438.1 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0657.2 mm
Attribute0741.71 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M5
Attribute10Alloy Steel with
Attribute114.0 mm
Attribute12Black Oxide
Attribute139.5 Nm
Attribute142 ea
Attribute152.26 Nm
Attribute163.0°
Attribute174.52 Nm
Attribute180.76 mm
Attribute199.04 Nm
Attribute200.38 mm
Attribute210.56 Deg/Nm
Attribute2230.032 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute307075-T651 Extruded and Drawn Aluminum Bar
Attribute31-40°F to 225°F (-40°C to 107°C)
Attribute32Bright, No Plating
Attribute33Ruland Manufacturing
Attribute34USA
Attribute35, Weight0.270300
Attribute36634529209622
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR38-18-15-A, 18mm x 15mm Six Beam Coupling, Aluminum | Ruland
WeightUnitlbs
diameter, height, width41.71
keywordsFCMR38-18-15-A, Beam Coupling, Six Beam Coupling
length57.2
moq, multiple, tierMinQty11
MPN, SKUFCMR38-18-15-A
qtyInStock0
snippetRuland part number FCMR38-18-15-A is an aluminum six beam coupling with 18mm x 15mm bores. Download a 2D/3D CAD file or purchase the FCMR38-18-15-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1116.57
tierPrice2105.96
tierPrice388.3
tierPrice479.46

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR38-18-15-A111 @ $116.57, 10 @ $105.96, 25 @ $88.30, 50 @ $79.46
cbtcompany.comFCMR38-18-15-A11
ZoroG7090872111 @ $92.00
Digi-Key1360508011011 @ $159.10
motionindustries.com06264615111 @ $156.59