CRL C0L5370RB Oil Rubbed Bronze Cologne 537 Series 5 Degree Pre-Set Wall Mount 'H' Back Plate

The <em><b>CRL Cologne Series</B></EM> of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Cologne Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. <b>Standard Reversible Pivot Pin:</b> Each Cologne Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 degrees. The opposite side is marked 85 degrees. Offset Models come with the Pin pre-set to 85 degrees (5 degree tighter closure into the shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. Standard Cologne Hinges come with the 90 degrees side activated. Using two hinges with 3/8 and 1/2 inch glass (10 and 12 millimeters) the hinge will hold up to 110 pounds (50 kilograms) with a maximum width of 36 inches (914 millimeters). Using three hinges with 3/8 and 1/2 inch glass (10 and 12 millimeters) the hinge will hold up to 140 pounds (63 kilograms) with a maximum width of 36 inches (914 millimeters). <b>Specifications:</b> <li>Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter) Tempered Safety Glass<li>Construction: Solid Brass<li>Hinge Swings: 90 Degrees Inwards and Outwards <li>Closing Type: Self-Centering when within 15 Degrees of closed position<li>Cut-Out Required<li>Includes: One Hinge, Gaskets, Screws and Template