As an Amazon Associate, we earn from qualifying purchases.

FCMR25-10-6-SS, 10mm x 6mm Six Beam Coupling, Stainless | Ruland

Ruland . FCMR25-10-6-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing
Attribute0010 mm
Attribute016 mm
Attribute02, Attribute0318.3 mm
Attribute0425.4 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0638.1 mm
Attribute0728.37 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M4
Attribute10Alloy Steel with
Attribute113.0 mm
Attribute12Black Oxide
Attribute134.6 Nm
Attribute142 ea
Attribute151.42 Nm
Attribute163.0°
Attribute172.83 Nm
Attribute180.38 mm
Attribute195.66 Nm
Attribute200.25 mm
Attribute210.41 Deg/Nm
Attribute2211.293 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute30Type 303 Austenitic, Non-Magnetic Bar
Attribute31-40°F to 350°F (-40°C to 176°C)
Attribute32Bright, No Plating
Attribute33, Label, Man, Publisher, StudioRuland Manufacturing
Attribute34USA
Attribute350.244500
Attribute36, UPC, EAN, EANList, UPCList634529043271
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR25-10-6-SS, 10mm x 6mm Six Beam Coupling, Stainless | Ruland
Weight0.244500 0.01
WeightUnitlbs
diameter, height, width28.37
keywordsFCMR25-10-6-SS, Beam Coupling, Six Beam Coupling
length38.1
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, ModelNumber, Model_number, PartNumber, Part_numberFCMR25-10-6-SS
qtyInStock-2
qtySourceFieldMap
snippetRuland part number FCMR25-10-6-SS is a 303 stainless steel six beam coupling with 10mm x 6mm bores. Download a 2D/3D CAD file or purchase the FCMR25-10-6-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1156.28
tierPrice2142.06
tierPrice3118.39
tierPrice4106.54
Product GroupBISS
ASINB0060M5GQA B08DLT9VF7
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
Amount, List_price132.08
AsinB0060M5GQA
BindingMisc.
Bullet_pointClamp mounting style installation helps increase positioning accuracy Four beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness Operating temperatures range from -40 to 350 degrees F Single-piece coupling for longer service life than couplings with moving parts Stainless steel for torsional stiffness and resistance to corrosion
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
Currency, CurrencyCodeUSD
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529043271 0634529043271 634529043271
FeatureFour beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
FetchTime1626042376 1651823340 1666910015 1677501578 1677573506 1678209784 1678580349 1680107249 1680161449 1680372787 1714685191
Height1338 386 58
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland FCMR25-10-6-SS Clamping Beam Coupling, Stainless Steel, Metric, 10mm Bore A Diameter, 6mm Bore B Diameter, 25.4mm OD, 38.1mm Length, 3.95 Nm Nominal Torque
Item_type_keywordbeam-couplings
KeywordFCMR25-10-6-A
Linkhttps://m.media-amazon.com/images/I/51zMVY8+OdL._SL75_.jpg https://m.media-amazon.com/images/I/51zMVY8+OdL.jpg https://m.media-amazon.com/images/I/71+gjv-HEyL.jpg
Marketplace_idATVPDKIKX0DER
Material, MaterialTypeStainless Steel
ParentAsinsB08DLT9VF7
ProductCategoryId16411731 biss_display_on_website
ProductGroupBISS BISS Basic
ProductType, ProductTypeNameFLEXIBLE_COUPLINGS
Product_site_launch_date2011-10-28T16:21:11.604Z
Rank1703071 590
ReleaseDate2017-05-15
Size6 millimeters
SkuRULAND FCMR25-10-10-A RULAND FCMR25-10-10-SS RULAND FCMR25-10-6-SS RULAND FCMR25-6-6-A RULAND FCMR25-6-6-SS RULAND MANUFACTURING FCMR25-10-10-SS RULAND MANUFACTURING FCMR25-10-6-A RULAND MANUFACTURING FCMR25-10-6-SS
Street_date2017-05-15T00:00:01Z
String_value10 25.4 38.1
StyleModern
TypeVARIATION ean gtin upc
URLhttps://m.media-amazon.com/images/I/51zMVY8+OdL._SL75_.jpg
Unitmillimeters
Unitspixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1731 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR25-10-6-SS1-211 @ $156.28, 10 @ $142.06, 25 @ $118.39, 50 @ $106.54
Raptor SuppliesAF9UCG111 @ $263.81
Digi-Key13594514111 @ $197.30
cbtcompany.comFCMR25-10-6-SS11
ZoroG7799346111 @ $127.00
Grainger30UR91111 @ $176.64
sustainablesupply.comC16447341-211 @ $153.23
AmazonB0060M5GQA11
motionindustries.com048046621Not in Stock, Available to Order11 @ $136.80

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland FCMR25-10-6-SS Clamping Beam Coupling, Stainless Steel, Metric, 10mm Bore A Diameter, 6mm Bore B Diameter, 25.4mm OD, 38.1mm Length, 3.95 Nm Nominal Torque
Brand: Ruland
Details
  • Four beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
  • Stainless steel for torsional stiffness and resistance to corrosion
  • Clamp mounting style installation helps increase positioning accuracy
  • Single-piece coupling for longer service life than couplings with moving parts
  • Operating temperatures range from -40 to 350 degrees F
Listing
BindingMisc.
Product groupBISS Basic
Product typeFLEXIBLE_COUPLINGS
ModelFCMR25-10-6-SS
Part numberFCMR25-10-6-SS
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
Catalog
FeatureFour beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
CategoryIndustrial & Scientific
MPNFCMR25-10-6-SS
UPC634529043271
EAN634529043271
Product groupBISS
Product typeFLEXIBLE_COUPLINGS
ManufacturerRuland Manufacturing
View on Amazon (paid link)